|
A rope splicer was killed at Garesfield Bute Colliery, Durham, owing to breaches of the rules on his part in going into a place of danger, and on the part of the onsetter in not keeping the pit bottom properly fenced. Deceased was engaged in splicing ropes of the main and tail haulage at the pit bottom. He had completed the tail rope, and when hauling the main rope into position, it broke at a deflecting sheave at the shaft bottom. A knot was tied connecting the ends of the rope, to permit of its being tightened up before being moved inbye for splicing. Deceased was standing in the shaft bottom to guide the knot into the wooden conduit in which the rope travelled when the cage descended and killed him. He could have performed the work from a point of safety in the passage way alongside the shaft. It appears to have been the custom at this colliery to raise the cage a few fathoms in the shaft when it was not required, and this had been done about 20 minutes before the accident by the onsetter giving the engineman what was locally known as an "all clear" signal, which apparently did not require a further signal from the onsetter should the engineman require to move the cage. As a shift of men was expected to ascend the shaft about the time of the accident the engineman lowered the cage without any warning. The practice of moving cages without proper and definite signals from the banksmen and onsetters is exceedingly dangerous.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||