|
At West Auckland Colliery, Durham, a shifter was killed on a self acting incline dipping 2 ft. 3 inches in the yard, at a spot where two empty tubs had been derailed. Deceased was operating the incline wheel at the bankhead, and, contrary to instructions, went down to assist in replacing the tubs. He previously fixed the brake lever under a projecting nail in a prop, and this was evidently not efficient, because, when the tubs were replaced on the rails, they started and ran over him. There was plenty of help at hand and he should have remained at his post by the brake lever.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 14 Mar 2023
|
Search |
|
|||