Logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Name Index (Local!)
Name Index (Rest of UK)
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Disasters - Names Return to Index Disasters - Names  
/ \
Date:  1917
Colliery:  South Moor, William
Company:  
Cause:  Cage accident
Lives Lost:  1
Category:  

Description

Accidents on the surface. — A very unusual accident occurred at the William Pit of the South Moor Collieries, Co. Durham, whereby one man lost his life and seven others were injured in the following manner : — At the end of the night shift eight workmen were being raised in a double-decked cage, with fence gates properly fixed, when at about the "meetings" cage nearly stopped, then went on again. The cage was drawn into the detaching hook bell and suspended there. With the impact all four gates became detached and fell to the landing. Three of the men were thrown out of the cage, and fortunately fell clear of the shaft. The others remained in the cage, one of them sustained a dislocation of the neck and died the following day. The winding engineman had been on duty only one hour, and he stated that after commencing to wind these men he felt faint, and tried to stop the engine, but failed to do so. He remembered nothing more until he was found lying back in his seat. It was found that the engineman, probably automatically, had placed his levers in the proper position, and had also applied the foot brake. The single cylinder vertical winding engine was fitted with Robey's overwinding prevention gear set to come into operation when the cage had reached a point two feet above the flatsheets. This had come into action, and the post brakes were hard on, but the steam valve had failed to close. When this was examined, it was found that a piece of sandstone, some two inches square and nearly an inch in thickness, was lying upon the valve seating. This prevented it closing, and at the same time allowed the full pressure of steam to be on the engine.

Some six months prior to the accident, alterations were made to the steam pipes outside of the enginehouse, when the end of the steam pipe just flush with the enginehouse wall was left exposed for a short time. The enginehouse is close to a road, and it is thought that the piece of stone may have been thrown into the pipe end by some mischievous child, and had later been carried by the steam into the throttle valve.

Two months before the accident the overwinder came into operation and worked quite satisfactorily. To try and secure immunity from a repetition of such an accident, the Agent of the collieries has made arrangements for testing the working of the automatic controllers once a week; and he gave instructions that when any steam pipe is dismantled, the end of the fixed pipe should be covered by a wooden dumb-end.

I would recommend these precautions to colliery engineers for general adoption.

Source: 

1917 Mines Inspectors Report



Fatalities



 
0 of 1 names found

 

Return Return   Return Return to Top

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print