|
At Burnmoor Colliery, Durham, a cleaner-out at a coalcutting machine was killed by an electric shock which he received by contact with the framework of the machine which was rendered "live" through defects in connection with the cable plug box at the machine, and the earth wire in the trailing cable. Owing to a loose or bad contact between a plug and socket a terminal was, overheated. The solder with which the lead at the other end of the terminal was sweated in was melted and ran out, making electrical contact with the brass casing enclosing the plugs, &c. The continuity of the earth wire was found to be broken at two places, one at either end of a joint 3 inches long, which had been made rigid and inflexible by the use of soldering to finish it off. Such rigid joints in a flexible cable should never be made. A dry joint properly spliced answers the purpose equally well, and at the same time will accommodate itself to the movement of the cable without putting undue strain upon the wires thereof.
|
|||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||