|
Deceased worked in a bord 7 yards wide, in a seam 1 foot 6 inches thick. Tub height was made in the middle by taking down 3 feet 2 inches of stone, and above that 1 foot 4 inches of coal, for a width of 6 feet. A roll put in cutting the top coal out, and crossing the bord almost at right angles. The tub road canch was up to that roll, only a piece of top coal being left in the left corner like a bracket. The deputy, the deceased man's father, saw this in his examination, and warned the hewer to take it down. This he did not do so, and after wotking in the place about one hour and a half, he was coming from the face under the canch when the piece of coal 3 feet long, 1 foot 4 inches thick, and 1 foot 6 inches wide, fell on to him, and fractured his spine. He died nine weeks later. He told his father that the coal appeared to be firm. He had made as unsuccessful effort to get it down, and left it. The accident illustrates the folloy of having attempted to get coal or stone down, and then leaving it without support.
See also: a1914-05
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||