|
This accident occurred in a seam 2 feet thick where longwall coal cutting machines are used; the coal is overlaid by a ramble stone 4 inches thick, which is propped up when there is plenty of height for the machines to travel under it; after the face had stood over a week end, the deceased examined it, and found it necessary to take down a short length of ramble which formed a bridge, the ramble being down at each end; he drew out the props carrying it and was just finishing clearing it away when a stone 7 feet long, 3 feet wide and 15 inches thick fell on to him; this stone came away at a visible breaker running parallel with the face, and a slip running from the coal face, obliquely into time roof cutting the breaker; the maximum timbering distance was 6 feet and a good pack was built 5 feet from the coal
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||