|
owing to one of the driving ropes on the fan pulley having jumped into another groove, Mills and another engineman were replacing the rope into its proper groove. This work was usually done at the week ends at the change of shifts when both enginemen were present, the fan being slowed down for the purpose; Mills was standing on a brick pillar pulling the rope towards him with an iron crook, when a splice in the rope caught the crook, causing him to fall on to the ropes, and he was carried over the pulley and thrown clear of the machinery on to the engine house floor, and his skull was fractured; although the steam had been shut off the fan engine there has still sufficient momentum left in the machinery to give a rope speed of about 300 feet per minute; there was no reason why the fan should not have been stopped altogether for the short time required to adjust the ropes; he died two days after
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||