|
An electrocution case occurred on the surface at the Lambton Bye-product and Coke Works, and was the result of forgetfulness on the part of the deceased, who had been employed as a fitter on the works for some months. One of his duties each morning during the breakfast hour, when the machinery was standing, was to clean out and oil the stamping machine. This was operated by a three-phase motor, the current at 500 volts being obtained from three hare wires by rubbing contacts. Before going to the machine it was his duty, which he had regularly performed, to switch off the current. On this particular morning he was found by the stamping machine attendant lying on the machine. On going to the switch the attendant found it was on, and after pulling it off, the deceased was removed from the machine and artificial respiration tried for an hour and a half, but when a doctor arrived he pronounced life extinct. The switch was quite in order, and it can only be surmised that on that particular occasion the deceased had omitted to put the switch off, an act of forgetfulness which cost him his life.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||