|
There was only one accident due to the use of electricity underground during the year, but unfortunately it was attended with loss of life. It occurred underground at Auckland Park Colliery, and resulted in the death of an engineman who was brakeing a hauler driven by a three-phase motor of 110-horse power, which received its current at 2,400 volts through an armoured three-core cable. The controller stood upon a wood floor and was not in metallic contact with the motor casing. The motor was only in contact with the haulage gear through the wheel gearing. The framework of the switch board, the controller casing and the frame of the motor were earthed by a copper wire attached to a copper rod embedded in damp coke breeze. When at his place of work, the engineman stood upon a dry wood floor, and hence if not in contact with any metal portion of the machinery was fairly well insulated. At his left hand he had the controller handle, on his right the haulage gear clutch lever, and at his feet a pair of foot-step brake levers. The electrician had only left the engineman some two minutes previously and was standing 10 yards distant when he heard him shout "Oh!" as the set was landing. He at once ran towards him and found him lying dead on the floor. The controller handle was found on examination to be in the "off" position. Repeated and careful tests failed to disclose any fault with the plant. An inquest was held by Mr. Coroner Proud on February 12th. The medical evidence, obtained partly from a post-mortem examination and partly by eliminating other possible causes of death, favoured the idea that death was brought about by electric shock, but this was by no means considered to be conclusive and Messrs. Bolckow, Vaughan & Company's Chief Electrical Engineer in his evidence stated that, on examination he had found no leakage or defect, and considered it absolutely impossible that the deceased could have received a shock. The jury returned the following verdict :— "Shock from electric current whilst following his employment, but there was no evidence to show how he came in contact with the electric current." After the inquest, feeling that the occurrence had not been satisfactorily explained, Mr. Nelson, H.M. Electrical Inspector, on the invitation of Mr. Bain, made further investigation, and also conducted some resistance tests of the various paths to earth with interesting results. If there was a leakage at the controller at the time the engineman had hold of the handle and had his foot on the brake, there would be two paths to earth one by the earth wire to the earth rod and the other through the man's body and then through the brake strap to the hauler. It has been explained that the incoming cable was armoured. With this sound earth Mr. Nelson showed that the haulage gear brakelever footstep was in better connection with earth than the metal rod, to which the motor frame and the controller casing were connected. Hence it is possible, given a leakage at the right moment, that the man did get a shock. The leakage, if any, must have been the result of momentary arcing to the controller casing, but it must be said that no evidence of this was found. Since the accident the motor frame, controller case, and switch board frame have been connected by stranded wire of ample section to the armouring of the cable.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||