|
The furnace shaft is also used as a coal drawing shaft for the Low Main seam and is traversed by two double decked cages holding one tub on each deck, and running in end slides which terminate about 5 feet from the landing. There is a separate winding shaft for the Yard seam, an upper seam, but no engineman attends during the night, and the Yard seam shifters and stonemen make use of the Low Main shaft, only using the upper deck of the north side cage. A code of signals posted up at the top and bottom of the shaft was not strictly observed, and it appeared to have been understood that while the upper deck of the north side cage was being used from the Yard seam no use should be made of the other cage, the lower deck of which stood level with the flat sheets at the Low Main, when men were getting out of the upper deck of the north side cage on its arrival at the surface from the Yard seam. About midnight men were both at the Yard seam and Low Main to ride, and signals were made to the surface from both levels. The north side cage was set at the Yard seam and some men got in and were drawn to the surface, but as more were to follow the engineman set the cage there again. While the first cage load of Yard seam men were getting out at the surface deceased and other men thought the top deck of the other cage was level with the plates at the Low Main, and a man and a boy got in and deceased was following them when the cage was drawn away, and he was dragged up the shaft and his head was severed from his body and remained in the cage, his body falling back. The bottom of the shaft was well lighted by electric lamps. The Local Inspectors reported that they considered it a pure accident
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||