|
Deceased, who had charge of the work was engaged with others in fixing one of the ropes to the drum of a newly erected winding engine. Previous to starting he had slightly opened the valve, admitting steam from the main steam pipe, as well as fixing a wedge in the throttle valve of the engine, so that a little steam might enter and warm the pipes and cylinders in order that the engine could be used to wind on the rope. To bend the rope end round the drum shaft, to which it was to be secured, a pair of small blocks was used, the fixed point being one of the uprights of the jam brake of the drum, and the tension was maintained for more than an hour until the rope was partly secured to the shaft, and no doubt pressed the brake against one side of the drum. Deceased ordered the blocks to be released while he and another man were inside the drum, and it immediately started to revolve and made 6½ revolutions before it could be stopped; no doubt steam had collected at some pressure inside the cylinders and became operative when the tension on the brake was relaxed. Deceased was rolled about inside the drum, eventually falling out on to a concrete floor 20 feet below. The other man seized hold of one of the arms of the drum and escaped injury
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||