|
No. 443 on the list occurred at Bourn Moor Colliery, on the 16th of December, 1902, and proved fatal on November 5th last to a man who was employed as a brakesman at the coal-cutting machine in a longwall face in the Five-Quarter Seam. The system of timbering was with chocks and props, the distance between the chocks laterally varied but it was 3 feet 6 inches from the face ; the stone usually breaks off behind these chocks and falls well when the back timber is drawn out, but if there is some distance between the chocks it is necessary to set two rows of props in between as jacks or slips are formed by the weight when the strata settles. In this instance, unfortunately, there had been only two props set between the chocks in line with the front of them. The coal-cutter was passing along the face opposite this place and the deceased stepped in between the chocks and props to watch a joint in the rails on which the cutter was travelling and a large stone fell out by the props at a slip and fatally injured him. The two chocks were set 5 feet and the props 3 feet apart. The stone forming the roof at this point was known to the deceased to be unsafe and he had just previously warned a youth not to go under it, but he appears, in his anxiety to get the cutter on with its work, to have forgotten it and gone under the stone himself with the result that be was fatally injured. Since this accident the distance between the chocks has been reduced to 3 feet which will make an accident of this kind less likely to happen.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||