|
Accident No. 7. This case was probably also to some extent attributable to the formation of ice in the shaft. It was caused by the cage leaving the guides, and tilting up sufficiently to throw deceased out, when he fell to the bottom. The shaft was fairly well fitted up, the cage guides being flat-bottomed rails, a description of fitting which has of late years become somewhat popular in the north of England. These rails were not all of the same section, not were the joints, even where the same section was fixed, in all cases fair, being so much as 1/16 untrue. One joint was loose. It could not however, be positively ascertained what had caused the cage to tilt.
|
|||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||