Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mine & Quarry Engineering - Main Index
Mine & Quarry Engineering - Subject Index
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
 Mine & Quarry Engineering June, 1944 

Mesozoic ironstones

These ironstones are of paramount importance at the moment. The output is very largely obtained from the Cleveland, Frodingham and Northamptonshire areas, but also has been obtained from numerous others.

The rocks in which mesozoic ironstones are found occur in two main areas. The band of greatest importance is that stretching from the north-east coast of Yorkshire for about three hundred miles, to Dorsetshire, and varying from less than a quarter of a mile to fifty miles wide. A smaller area occurs in Hampshire, Surrey, Sussex and Kent and in the Weald.

The Frodingham ore is in the lower lias (zone of amonites semicostatum), the Cleveland ore in the middle lias (ammonites spinatim) as are the marlstones of Leicester, Oxford and Banbury, whilst the Northamptonshire ore of South Lincs., Rutland and Northamptonshire is at the base of the inferior oolite (ammonites scissum). These ores are continuous in many instances, over areas other than which they are mined. Thus, 90 ft. above the Frodingham ironstone is the Pectan Bed of Cleveland. Though it is only about 3 ft. thick, it is said to have been dug at West Halton, a few miles to the north of Scunthorpe. Still higher in the sequence and visible in the Appleby railway cutting is the Cleveland Main Seam, though here it is again very thin and not workable. Still higher a very thin band of ironstone is identified as the Northamptonshire ironstone.

Mineralogically, the Frodingham ore consists of limonite oolites, whilst Cleveland (except Rosedale), the Marlstone and the Northamptonshire ironstone all consist of chamosite siderite mudstones. The Rosedale ore is a ferric chamosite oolite. The ore was a primary formation, deposited in shallow water where conditions favoured excess of iron bearing material, probably due to the leaching out of mud, etc. The old theory of metasomatic replacement of limestone, put forward by Sorby, does not now seem to be generally accepted. A feature of the geology of these parts is that where ironstones are present, there is generally a "condensed succession." Before dealing with the most important areas, small ones or those of only historic interest will be considered.

The Weald

This is the first district in Britain where ironstone was worked on a relatively large scale. There is considerable evidence that the Romans worked Wealden ores, but after Roman times there is a dearth of information for the next seven or eight centuries though the furnaces were probably still in blast when the Saxons arrived. One of the mines was mentioned in Domesday Book. From 1275 onwards, there are only odd references till 1400, and none at all for the next century. After this came extensive development, together with rapid destruction of the forests, resulting in the passing of the various restriction acts as that of 1543. In 1653 there were 27 furnaces in Sussex, but by 1664 the number was reduced to 11, the zenith having passed. One furnace only was still in blast in 1825 and this was put out in 1828.

Ore occurs at various geological horizons in beds of various thicknesses and operations were mainly confined to the Hastings Beds, the Weald Clay and the Lower Greensand. Workings were opencast at outcrop ironstone.

At different times, ironstone, of no importance, has been worked at Kirby Underdale and Goodmanham in East Yorkshire ; at Seend, near Devizes; at Abbotsbury in Wiltshire ; at Hengistbury Head, one mile east of Bournemouth; at Westbury in Dorsetshire; near to Frome in Surrey; at Dorking, Horley, at Tunbridge Wells; and near to Dover.

Caistor area

At Claxby, near to Caistor, is a deposit of some importance. This ironstone is at the base of the Tealby Clay and immediately above the Spilsby Sandstone (lower cretaceous). There is a maximum thickness of 14 ft., but only the lower part, about 6 ft. 6 in., is worked. The ore is mainly siliceous. One mine is working the Claxby ironstone at Nettleton, and nearby another company have taken a large royalty and explored it by drifting. At Nettleton, in 1938, there were 97 men underground. Two main haulage adits have been driven into the hillside, and there is a ventilation shaft on the hilltop. The method of working is pillar and stall and the last stages of the pillars are removed by slicing, giving 85 per cent. recovery. Pneumatic picks are used, and also some hand drilling is done. Loading is by hand. Horses are used for auxiliary haulage and a Ruston diesel locomotive for main haulage. Ore is carried by aerial ropeway to Holton-le-Moor station, a distance of 1¼ miles.

Raasay

On the island of Raasay, between Skye and the mainland, is a deposit of ironstone worthy of mention. It occurs in the lower portion of the upper lias and is 8 ft. thick, consisting of separate oolite bands, which show local variations, and is essentially chamosite.

The ore occurs in a main strip running almost completely across the island from the south-west to the north-east, i.e., from Chrichton Bay to the north of Hallaig; and also in a separate outlier in the south-east corner of Beinn na' Leac. This body was explored in 1910 and was bored to 600 ft. from outcrop, proving a total of 16 million tons of ore. In 1920 there was a main mine and also opencast workings to the east, all being in the middle of the southern edge of the field. The first dragline excavator in the ironstone industry of Britain was put to use on Raasay in 1916; it was an American 14-Bucyrus. The operation was stopped soon after 1920, but the machine is still at Raasay.

Dover

In the sinking of Shakespeare colliery, a 16 ft. thick bed of ironstone of Corallian age was found at 656 ft. and a considerable amount of money was spent in trying to work this ore, but owing to water and other difficulties the project was soon abandoned.

Rosedale

The Rosedale deposit, high up on the moors behind Whitby, is worth mentioning. The ore is the Dogger ore, of inferior oolite horizon. The most valuable orebodies were two exceptional masses of magnetic stones in narrow channels in the Alum shale. They were about 70 ft. thick in the centre and a quarter of a mile long, and were known as Garbutts Deposit and Kitchings Deposit. They contained 43 per cent, of metallic iron and were worked by a series of levels from 1857 to 1880; in that time they yielded over 3 million tons of ore.

We are now left to consider the areas of great economic importance. From a mining point of view these areas can be divided into two classes :—

1. Those worked by opencast methods (quarrying).

2. Those worked by underground mining.

All the marlstone of South Lincolnshire, Leicestershire, Oxfordshire and Banbury is quarried and so is most of the Frodingham and Northamptonshire stone, whilst all the Cleveland stone is mined.

(1) Quarrying has been done at outcrops for many centuries. In 1936, at Thealby quarry, Frodingham, removal of the few inches of topsoil, produced a magnificent blast furnace bear, nearly three feet in diameter. A crematorium and other things of great archaeological interest proved beyond a doubt evidence of Roman activity.

Originally, hand methods were used for removal of both overburden and stone. These consisted of shovelling the loose top soil into wheelbarrows, and pushing the wheelbarrow across planks supported by trestles, over the railway lines to the dump behind, on ground from which the ironstone had been removed. This method is used for very little cover and also for filling ironstone into wagons where dirt and sulphur bands are numerous in the ironstone, as at Ashby Ville, at the south end of the workable part of the Frodingham ironstone.

Later, steam diggers, transporters and multi-bucket excavators were used and more recently dragline excavators, trac-tractors and walking draglines (see Figs. 4 to 8). A considerable amount of literature has been published on these machines and little will be said here. Early machines, some of revolutionary design, were usually steam driven and ran on rails. Later came the diesel, electric and combined diesel-electric machines, and caterpillar type mountings. Very recently the use of the walking draglines, which can be used on a very soft and loose floor, has been a great step forward, An example of the size of some of these machines is given by the Ransomes and Rapier "5360," used firstly at Corby in 1934, which weighs over 600 tons, is mounted on four rail-mounted bogies and carrying a 9 cu. yd. bucket to dump at a radius of 103 ft. and which can deal with 45 to 55 ft. of overburden at the rate of 2,000 to 3,000 cu. yd. in eight working hours. It employs the Ward Leonard system of control, using a motor coupled to generators which supply d.c. current to separate motors for digging, swinging and crowding. The ironstone digger following the stripping machine usually weighs about 130 tons and can dig about 2,000 tons of ironstone per working day.

There are various types of quarry layout, the variations chiefly depending on the amount and type of overburden. With deeper cover, the problem of the removal of overburden obviously becomes more acute. Different types of overburden cause a variation in the maximum amount that can be handled without causing undue difficulty. Thus at Frodingham, a cover consisting of loose clay and sand with a low angle of repose produces difficulties at a total depth of overburden that would give little difficulty were the material hard limestone as in parts of South Lincolnshire and Northamptonshire. An important factor is the distance which the overburden has to be cast back. At Frodingham it has always been the practice to have the ore wagons at the bottom of the ironstone, but at Corby the wagons are on the top of the ironstone and the dumped overburden comes right up to the ironstone face, thus reducing the distance to be bridged by at least 10 ft. Another difference is that at Corby the holes are drilled before the overburden is removed. Where the cover is considerable it is sometimes necessary to cast back more than once, and sometimes some of the material is taken completely away.

It is essentially an economic consideration as to when the change-over from quarrying to mining underground should take place. When the quarrying costs are greater due to increase difficulties, then underground mining should be resorted to; a study of the Frodingham field illustrates this point. The Frodingham ironstone is a lenticular deposit, which in itself consists of many lenses and occupies a six-mile north to south workable outcrop, with its centre 30 ft. thick at the village of Frodingham, now part of the borough of Scunthorpe.

(To be continued.)

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 17 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print