Museum Entrance Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Main Document Archive
Newspaper Articles
Local Record Extracts
D.M.A. Document Archive
Transactions of I.M.E.
Miners' Welfare
N.C.B. Archive
The Colliery Engineer
The Colliery Guardian
Mine & Quarry Engineering
Mine & Quarry Engineering - Main Index
Mine & Quarry Engineering - Subject Index
Mining Journal
The Science and Art of Mining
Coal Magazine
Coal News
Coke and Gas
Master Name Index
What's new in the site
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

Title Prev Page Return to Index Next Page Title
 
 Mine & Quarry Engineering May, 1944 

Cumberland and Furness

Iron ore has been worked in this area for many centuries and it appears that the Romans worked small outcrops. The earliest written record is of a mine near Egremont, granted to the Abbey of Holme Cultram in 1179.

The iron ore occurs as irregular shaped bodies in the Carboniferous limestone, though traces of ore have been found in the strip of magnesian limestone that runs through Furness, and there are cases of hematite in the Skiddaw Slates (Silurian) and also one in the coal measures. These ores occur as masses, flats, veins, sops, etc., and are sometimes very irregular and of great thickness.

The origin of the ore has been the subject of considerable controversy. Two fundamentally different theories have been offered. Both agree that formation is by metasomatic replacement, though it was suggested many years ago that the ore filled in cavities in the limestone. Bernard Smith suggests that the iron came from the overlying New Red Sandstone, whereas the theory propounded by MacDonald and Dixon suggests that the mineralising agent ascended as magmatic solutions. Secondary enrichment has often resulted in the formation of kidney and specular ore. The Carboniferous limestone is very faulted, and ore is usually found on these faults. Search for these faults is the basis of the exploration work in new areas. These ores are by far the most important unstratified ones of Great Britain and have produced colossal amounts of ore, the greatest production being from towards the end of the last century until the end of the last war. The hematites are the only non-phosphoric ores in Britain, and hence the only ones suitable for making acid steel. In the past, specifications often insisted on acid steel for many purposes. Indeed, many still do, as, for example, winding ropes, and this conservative attitude probably helped the hematite ore mining at the expense of the jurassic and coal measure ores. The different ore localities are :—

Eskdale and Ennerdale. There are numerous deposits in the Eskdale granite and the Ennerdale granophyre, and also those of Duddon Valley, Langdale and Bowfell; these, however, have never been of any commercial importance. Ore at Nab Ghyll, in Eskdale, near to Boot, was worked at one time by five different levels driven into the hillside at various heights, ore occurring in bunches or "bellies" in the Eskdale granite. The mine worked from 1870 to 1882, ore being conveyed to the port of Ravenglass by the miniature railway from Boot and thence shipped to Whitehaven. More important are the deposits in the Skiddaw Slates. Two mines were at one time quite flourishing. They were the adjoining Knockmurton and Kelton Fell mines, overlooking Lake Ennerdale. Their importance can be gathered from the fact that a special mountain railway was built from Rowrah station to wind in a zig-zag path up to these mines, a length of 2½ miles to Knockmurton (as the crow flies) at an extremely steep gradient which can be gathered from the fact that Rowrah station is 550 ft., Kelton Fell shafts each about 850 ft. and Knockmurton 1,000 ft., all above ordnance datum. Knockmurton was started in 1853 and Kelton Fell a number of years afterwards. Activity continued until after the last war. The ore occurs mainly as veins. At Kelton Fell there were three shafts and at Knockmurton one, with various levels here the ore is in lenticular form. From the shafts at Kelton Fell stone drifts were taken out to the veins. Then levels were made — the 25-fathom level was taken out, then the 50-fathom, etc. Separate veins have been worked for lengths up to 240 fathoms and depths of 56 fathoms. Between each level rises were made, connected at intervals by "thirls" for ventilation. Ore was obtained by pillar and stall methods. The outputs of the two mines together were

In 1872 14,435 tons
 1883 61,377 ,,
 1888 46,100 ,,
 1913 15,257 ,,

It was said that when Knockmurton was stopped in March, 1914, there were 7,000 tons of pillared ore left. There are other iron veins nearby, but none has been worked.

Millom. Near to Millom the Hodbarrow deposit is the largest single one of its type in the country. It is in the Carboniferous limestone. This deposit is a large and irregular dish-like one, some 1,000 yd. long, 400 yd. wide, 130 ft. maximum thickness, 65 ft. average thickness, and has produced large quantities of ore and is still producing. In order to be able to mine further ore, the Hodbarrow Mining Company from 1927 to 1931 sank the Moorbank shaft. Messrs. Foraky sank this shaft by freezing down to 180 ft. and then in the dry to 580 ft. Many difficulties were encountered, such as cavities filled with running sand and clay, the presence of which was unknown. An excellent description of this undertaking was given in January, 1938, by H. Mussche. Shallow workings under the Duddon estuary of this mine are hydraulically stowed to prevent access by the sea, and boreholes on the shore were used for sending down seashore sand. This practice of stowing has been used at Cleator Moor to extract pillars under the town; the method was copied from the Silesian coal mines. Sand from Helder pit, Egremont, was run down 6 in. dia. boreholes with mine water, into the workings and held in place by timber batteries. Inrushes of water and quicksand in the northern part of the Hodbarrow mine have caused great trouble; it costs about £ 20,000 to clean up each such inrush. Mining is by bord and pillar method.

Close to Millom, at Water Blean, there is a deposit of hematite in the Skiddaw Slates (Silurian). The ore is bright red and has been used as a pigment, as well as for smelting ; it occurs in a cavity in the limestone immediately below the boulder clay drift. There are also a few small veins, but they are not now worked.

Furness. From 1880 to 1890 the Furness hematite field produced over a million tons of ore each year, and, previously, over half a million each year from 1850 to 1880. The productive field is in the Askham, Roadhead, Lindal Moor, Dalton, Park area. The ore is very rich and the area was once a very important producer. In 1725 a tract entitled "The Interest of Great Britain in supplying herself with iron" made the following statement: "Cumberland and Lancashire are supposed capable of answering the purposes not only of this nation but even of the universe."

In 1774 Whitrigg's mine was called "The Peru of Furness." We quote from the Editorial of the "Manchester Guardian" :—

"The great beds of iron ore near Dalton and Askham, once described as the richest in the world — Whitriggs, Mouzel and what is now the enormous cavity of the Park Mine — appear on the countryside only like the excavations of an extinct civilisation. The pits that still remain in Furness resemble fossil remains of a prior age. In the last war it was hardly so. Then the big Pennington Pit, the slag from which has recently been used as a foundation for the new section of the Ulverston-Barrow road, was worked with feverish energy in double shifts day and night. And ' California' hung its lanterns on the hill, prognosticating the finds of new ore, where all is now dark as Erebus.

As regards worked out iron ore, there is one rather quaint superstition of our fathers which deserves mention. It was their belief that iron ore, when exhausted, would grow again, like a vegetable. Thus in a lease of 1707 granted by the Duke of Montagu to mine in Furness we read 'All the Oare Iron Ironstone and mines and veins and bedds of iron growing lyeing and being within the customary lands situate at Tytupp and Lindal.' And about the same time a writer in Italy observes 'It is affirmed of the iron mines in the Duke of Florence's country that in three years' time the same mine will be as pregnant with ore as it was before it was exhausted.' "

The ores are either hard, compact purple ores or dull reddish purple, or soft and dark. Dish-like deposits are more common than in West Cumberland, but there are also veins, flats and irregular deposits.

The larger dish deposits were mined by sinking a shaft in the middle of the ore body and driving levels out as soon as possible whilst still sinking and in developing and robbing these levels. When subsidence of this part became noticeable a second shaft was sunk outside the ore body and levels driven into it and developed and robbed systematically until all the ore was gone. This method often resulted in very large surface subsidence. At the Old Park mine, near Dalton-in-Furness, a whole rectangular area collapsed to a depth of over 200 ft. Another feature is that subsidence may take place many years afterwards, and probably very suddenly, due to hanging of strong limestone beds.

The good old days of Furness appear to be gone, but some ore is still raised at Yarlside.

Whitehaven Area. The Cleator Moor-Frizington-Egremont area has always been the most important producer and is the main Cumberland field. Different horizons of the Carboniferous limestone over this area contain a tremendous number of hematite deposits of very varying sizes. The present mines, with the exception of reopened ones, are to the south of this area.

Before going on to a detailed description of methods of working in the larger mines, let us consider a few of the methods that have been employed for mining different types of ore bodies.

Veins, if wide, are mined by bord and pillar methods. If thin veins, they are treated like lodes, with levels and rises and the ore is stoped out. Stopes have been filled at Cleator Moor to avoid surface subsidence.

Sops are mined with horizontal slices and no middlings. The top is taken down and each slice is cleaned out and the roof allowed to collapse before the next slice is taken.

Flats. Described in detail later. However, the old Longlands mine at Woodend was worked by longwall methods.

Beckermet is a typical Cumberland mine working flat irregular ore bodies with vein deposits also. Ore occurs in some cases away from the faults as well as associated with them. The presence of ore in the Brockram (basal new red sandstone conglomerate) is of interest here. The most important features are the Winscales fault, with a throw of about 100 ft. and the Haile fault with a small throw. The former runs N. to S.S.E. and the latter branches off from this and trends S.E. towards Haile; the two form a V-shaped trough. The main ore body is an irregular flat on the west side of the Winscales fault, and it tapers into veins. Here the ore is the hard blue type with a little kidney along the faults. The whole property has an extent of 900 acres. Started early this century, the mine output in 1939 was 250,000 tons a year, and this figure has been maintained for most of its life.

The method of working this ore is probably typical of this area. It is the deepest mine and workings are about 1,500 ft. in the deepest point. Two shafts were sunk half a mile apart with a difference of 150 ft. in surface level. This, together with the fact that the shaft, normally the downcast is very wet and the other is dry, affords natural ventilation although there are some booster fans inbye. The shafts are rectangular, 18 ft. long by 7 ft. 9 in. wide, and have pitch-pine linings; they were sunk outside the ore body, as is customary in Cumberland, to avoid having to make a shaft pillar in ore, and drifts are driven to connect with the ore deposit. Mucking in such drifts is now done at Beckermet with the Gardner-Denver loader (Fig. 2). This consists of a compressed air-operated dipper, the latter being actuated by the pull of two cable chains which wind over sheaves positioned on the jackshaft. The dipper is mounted on wheels and works on the rail track. In operation the dipper is lowered and fed forward into the muck pile and then pulled up over the machine to dump its load into the mine car fastened immediately behind the machine.

From these shafts, the limits of the ore body are found by driving right and left from the main road at fixed intervals, usually about 50 ft. To prove the vertical extent, raises are driven at various points and levels 15 ft. wide by 10 ft. high are opened out at 25 ft. intervals. Each level is developed into pillars 30 ft. square vertically above those on the level below, leaving a 15 ft. solid "middling" between. Robbery of the pillars is commenced at the far end back towards the raise, or "drop shaft" In some cases ore is tipped into hoppers to the main haulage road below. The top level is started first and the robbery is always nearer the drop shaft than for the level below. With all the levels but the top one, all but a few feet of the middling is brought back, using stoper drills; this middling left affords protection from the caved material above. Pillars are halved and sometimes quartered and then sliced, slices being three or four feet wide, until only a stump is left. Recovery of the thin middling is done by solid timber "spiling" through the collapsed ground (Fig. 3). That is, driving wooden planks 6 ft. long over a roof bar into the fallen ore and thus affording protection to the miners. Another roof bar is set as soon as possible and the operation is repeated. The objective sought after is continuous and steady caving of the roof. This caving may or may not be controlled by a timber mat.

Wet compressed air drilling is done by hammer drills, bar mounted in the larger workings. Eversoft blasting gelignite with No. 6 detonators and 90 sec. per yd. fuse for blasting are used. The fuse is lighted by means of a candle. A centre "cut" is very often used which fires slightly in front of the rest of the round. The whole round is usually fired together at the end of the shift. Dust is settled by a mist spray consisting of an oily water jet forced out of a special tube by means of compressed air. Haulage is by hand to the raises or hoppers and then usually by endless rope to the pit bottom. Some "dillies" or self-acting inclines are used.

Water is quite a problem, since about 45,000 gallons per hour have to be handled. In a large well-made pump-house at No. 1 pit bottom, fed by a drainage level lower than the main haulage level, there are two 800 g.p.m. Mather and Platt Plurovane pumps, capable of pumping against a total head of 1,440 ft. One of these pumps can usually handle all the water. As a stand-by, there is a large beam pump, driven by a compound steam engine on the surface.

At Florence, the neighbouring mine to the north and west of Beckermet, one or two differences make an interesting comparison. The Florence flat deposit is, with the exception of Hodbarrow, the largest one in West Cumberland. Florence mine was sunk from 1914 to 1920. Ore was reached in 1920. By May, 1923, 3,500 tons per week were being produced. This was subsequently increased.

The shaft is circular, 17 ft. inside dia. and 1,014 ft. deep. It is sunk into the ore body and consequently there is a shaft pillar in ore. The water level is a few feet below the main haulage level. Mining is by "top-slicing." Inclines, drop shafts and raises are made to the top of the orebody. The ore is worked from the top and is brought down on to a boarded floor. This floor forms the roof of the lift below and controls caving; 66 ft. square pillars are formed. The ore is lowered by endless rope, self-acting inclines and raises to the shaft bottom. Some 350 g.p.m. of water is handled by two turbine type pumps with a total head of 1,110 ft.

Exploration from the surface is done by lead shot boring, starting with cores about 10 in. in dia. for holes to a depth of around 1,000 ft. Excellent cores are obtained. Some underground exploration is done with a Sullivan "Beauty" diamond drilling machine.

(To be continued.)

Drawings and Photographs accompanying the article

 

Prev Page Return to Top of Page Next Page

Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 17 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print