|
Description of Alum Shale The Alum Shale lies at the top of the Upper Lias over the Jet Shales, and has generally a thickness of 90 to 100 ft. The old alum workings, which are numerous along the coast and in the escarpments of the Cleveland Hills, have formed great scars in which the beds are usually well exposed and can be observed unless covered by land-slips. The shales are crumbling and grey to light-brown, and contain much disseminated iron pyrites and ferrous sulphate. The upper part contains lines of "cementstone" nodules which at one time were used in the manufacture of cement, while the lower beds are somewhat bituminous and do not contain aluminium sulphate. The pyrites is supposed to have been responsible for the formation of the potash alum in the shales, for oxidation due to weathering would result in sulphuric acid :
FeS2 + 3H2O + 3O3 = 2H2SO4 + FeO + H2.
The sulphuric acid, with the addition of water from the atmosphere, would react with the alumina and potash of the shale to give alum :
K2O + Al2O3 + 4H2SO4 + 20H2O = K2SO4AL2(SO4)324B2C.
The ferrous sulphate is probably the result of the action of the acid on the excess pyrites. The rock was easy to quarry as it is soft and friable, but undercutting would no doubt have to he avoided to prevent the danger of falling rock. R. Winter7 wrote in 1810 "The hewing of the rock is performed with picks and javelins; and it is conveyed to the calcining place in barrows. . . . Ten of these barrows contain one solid yard of the rock. The expenses of working the rock vary according to the facility with which it can be hewn. When the distance the rock is to be harrowed is about 200 yards, the rate for removing and hewing one cubic yard is about 6½d. It is unnecessary to state that the price must maintain a corresponding ratio to the distance to be conveyed. The men earn about 2s. 6d. per day in the winter season, and 3s. in the summer." Extraction The methods of extracting the alum from the shale after quarrying are of ancient origin, and those employed in Yorkshire until the nineteenth century were no doubt introduced from the Continent. Agricola8 described three methods of extraction, two from alum shale and one from alum rock or "alunite," the rock of Tolfa. Alum shale was first allowed to weather in the open air for some months and then placed in large tanks, when water and urine were added to form a mixture which was stirred continuously. The early writers do not seem to have known the action of the urine and were under the impression that it separated the "vitriol" from the alum, vitriol being ferrous sulphate; but actually its only effect was the production of ammonia alum instead of potash alum, the potassium in the sulphate being replaced by the ammonium radicle in the urine. The waste shale having settled in the tanks as a mud, the solution was run into reservoirs and after further settling had been allowed for it was boiled almost to complete evaporation. The residue, consisting of so-called "alum meal," was then boiled again until a crystalline mass was left, which was "poured into a wooden tub sunk into the earth in order to cool it." Agricola continues: "When it becomes cold it is poured into vats, in which are arranged horizontal and vertical twigs, to which the alum clings when it condenses ; and thus are made the small white transparent cubes, which are laid to dry in hot rooms." The other method of making alum from shales was almost identical except that the rock was roasted in an enclosed space before being exposed to the action of the weather for months. Alum rock was treated similarly, being roasted in a kiln of the lime-kiln type until the sulphurous fumes had been exhaled and then allowed to cool. The rock was drawn out, piled up, and sprinkled with water for forty days until it disintegrated. It was then boiled in water in a cauldron lined with a cement composed of lime, wine, iron-scales, sea-snails, white of eggs and oil. "The water, when sufficiently purified and ready to congeal, is ladled out and run off into launders into thirty troughs. . . . In these the water congeals and condenses into alum, in the spring in the space of four days, and in summer in six days. . . . Then the alum is hewn out with a knife or chisel.8 Variations of these processes, mostly alike in their essentials, were described by W. Simpson9 and D. Colwall10 in the seventeenth century, and by R. Winter7 and G. Young4 in the nineteenth. Winter describes how the shale was calcined in heaps ot wood faggots, the fire being started from the bottom. The calcined heaps were raised to a height of 90 to 100 ft. and extended to a length and breadth of 150 to 200 ft. After calcination the piles of residue were steeped in water which was continually re-pumped through the substance until the required specific gravity, usually 1.15, was obtained. Often, however, the alum was stained with ferrous sulphate, which could be removed by the addition of potassium chloride to the concentrated alum solution :
FeSO4 + 2KCl = FeCl2 + K2SO4.
Ferrous chloride and potassium sulphate were formed, and the latter combined with any excess of aluminium sulphate to form additional alum. Conclusion The tendency of aluminium to occur in complex compounds rather than in simple compounds is well illustrated by the sulphate. This forms a series of complex salts of the type R1SO4.Al2(SO4)3.24H2O, where R1 represents a monovalent radicle, and these salts are grouped under the term "alums." The monovalent elements which can form alums are thallium, caesium, rubidium, potassium, and sodium, as well as the monovalent radicles ammonium and hydroxylamine. The most widely known alum, of course, is potash alum, as it occurs in Nature and can be manufactured cheaply; ammonium salts are less plentiful in Nature but result as by-products from industrial processes, and ammonia alum is the next commonest variety. There is no doubt that if the Alum Shales of Yorkshire were ever worked again the alum could be extracted in a much more profitable manner than in the past. Beneficiation of the weathered and roasted rock by the addition of sulphuric acid would ensure more complete digestion of the alumina and alumino-silicates, in a process comparable to Spence's. The potash content of the shale being low, it would then probably be necessary to add a cheap potassium salt to form potash alum or an ammonium salt to form ammonia alum. Certain advantages these shales have over those of the Coal Measures lie in their thickness, their good exposure at surfaces (whereby large areas are presented for weathering), and their accessibility. REFERENCES
Drawings and Photographs accompanying the article
Article reproduced from a copy of the magazine held at National Mining Museum Scotland, Newtongrange, Midlothian.
|
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 17 Jan 2023
|
Search |
|
|||