|
Ralph Curry
A staple brakesman was killed in a rather extraordinary manner at Harraton Colliery, Durham, by being hoisted to the roof by his brake lever. This man was braking a self-acting gravity staple when the brake seized owing to the brake shaft bursting from its bearings. The brake lever handle was jerked violently upwards, striking the brakesman in the chest and lifting him upwards to the roof, a height of about 7 feet 6 inches. He fell back upon a loaded tub and was found lying dead across it with his skull fractured. One of the brasses from the shaft bearing was found close to him, and it is surmised that it had struck him on the head as it fell. There was nothing to account for the brake shaft bursting from the pedestal, except that some short time previously the cages in the staple had been amain, and it is probable that the upcoming cage struck the drum and brake-gear sufficiently violently to cause a fracture in the pedestal cover. The shock of the application of the brake on this run, which was the first one after putting the staple right, was more than the fractured cover could stand, so that the shaft came out of place. The drum and all the apparatus connected with it ought to have been carefully examined before any further work was done with it.
If you are researching Ralph Curry (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||