|
John Henry Nelson
Deceased and his brother were working in a 6-foot seam, including a middle band of 2 feet 6 inches thick, worked longwall; the bottom coal and the middle band having been taken out in the left-hand side a shot was put into the overhanging top coal; this was fired, but it left a lot of the coal still standing; it was stated by deceased's brother at the inquest that the roof was joaled after the shot was fired; whilst deceased was getting the remainder of the coal down with the pick he liberated from the roof above him a large "cauldron pot" 6 feet in diameter and 1 foot 6 inches thick in the middle, tapering off to a feather-edge; the "pot" was perfectly smooth on its upper side, and its pressure had been quite unsuspected; it canted out a prop and a plank; the working place was well timbered and packed
If you are researching John Henry Nelson (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||