|
William Gatenby
under the deceased's directions a cab of a tank locomotive was being placed in position on the locomotive after it had been removed for repairs; to lift the cab a chain from an overhead crane had been passed under the top of the cab, and in order to prevent the cab top buckling when th weight came on the chain, a batten 7 inches by 2½ inches by 7 feet 6 inches long had been fitted under the top of the cab, between the side angle irons, and under which the chain passed. The cab was placed in position by the crane and the chain removed, but through an oversight the batten was left up, it being held to some extent by the angle irons of the cab. As the men were trying to fit the cab exactlt into position deceased came up, and whilst standing on the ground he put his head inside the cab to see how to fit a bolt-hole, when the batten, probably disturbed by the movements of the cab, fell down striking his head, causing him to fall back and to again strike his head on the edge of a baulk of timber lying on the ground. He never regained consciousness and died the same afternoon.
If you are researching William Gatenby (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||