|
Albert Harker
The first fatality occurred in a chert mine at Fremington Edge near Reeth. The chert forms a bed from 4 to 5 feet in thickness, and is worked on a more or less Longwall system. The bottom portion for a thickness of 18 inches is of an inferior nature and is shot and barred out as far as the next joint, usually 3 to 4 feet distant. The holing is generally carried on for a length of nearly 6 feet from the loose end before the chert is shot down. In the present case holing for a depth of 3 feet and for a distance of 2½ feet from the loose end had been effected and two shots had been fired in the operation. The deceased was using a pick to bar out some loose stone when a block of chert with a capacity of about 27 cubic feet suddenly broke off and pinned him down. Previous examination had failed to indicate the presence of any line of weakness, but after the accident it was apparent that such a "jack" or "dry" as they are locally termed had existed for a depth of 18 inches from the roof, and the mass of chert simply broke off by its own weight. In the present case the actual area of holing which had been done was 7 or 8 square feet, whereas usually the extent was 18 square feet. It was at once agreed by the management that the only way to prevent such unfortunate accidents was to support the mass as soon as it was possible to do so and not wait until several square feet of support had been removed.
If you are researching Albert Harker (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||