











































|
| |
Individual Details |
|
Individual Details |
|
 |
|
 |
Henry Dixon
| Age: | 29 |
| Died: | 26th Sep 1910 |
| Accident: | 26th Sep 1910 |
| Year Born: | abt. 1881 |
| Colliery: | Mainsforth |
| Company: | Carlton Iron Co., Ltd. |
| Occupation: | Hewer |
| Notes: | being the first day of the quarter it was his first shift in the wide bord in which he was working. The total thickness of the seam was 8 feet including a stone band 2 feet 8 inches in the middle. A shot had been fired in the top coal about 2½ hours before the accident and had failed to bring down all the coal, so after hewing as much down as he could, he set a prop under the remainder and commenced to kirve in the bottom coal. While so engaged some coal fell away at a strongly marked "back" and canted out a prop set under the band, thereby causing the latter to fall on the deceased. It was not certain if there was only one jud prop set, but there should have been two |
| Buried: | Duncombe Cemetery, Ferryhill |
| Category: | Falls in the Mine :: Falls of Side :: At working faces, whilst hewing or working |
Ferryhill — Duncombe Cemetery
Location: OS Map 93, Grid Ref NZ303324
|
This is a low resolution image for web display, if you would like to have a higher resolution image, then please
us quoting reference T-08786-13-0002 and we will make the image available on a temporary page for you to access.
|
|
[The image has been requested twice before]
|
| Names in this memorial picture |
| Name | Died | Age | Born |
| Not listed | | | |
- 1910 Mines Inspectors Report (Cd 5676), Durham District (No. 3) by A. D. Nicholson, H.M. Inspector of Mines, Page: 31, Accident Number: 2 Where to find this report
- Church/Cemetery photograph (T-00346-01-0002) © Kev Duncan
- Memorial photograph (T-08786-13-0002) © Kev Duncan
If you are researching Henry Dixon (e.g. for family tree purposes) and you would
like to hear from others with the same interest then please complete
the details in the following form. We will show the information you provide
on this page so that you can be contacted.
 Return
 Return to Top
|
|