|
Michael Hoban
He, with two others, was driving a place through the pillars in the Hutton Seam for an engine plane. The coal was 3 feet thick and a top caunch, also 3 feet thick, was being taken down. This top caunch had been shot down almost on to the coal except at the left side, and a hole was being made in the stone at the right side to take the end of a steel girder, when the piece of caunch left on on the left side came over on to him. Across the face of the caunch was a joint, which was visible prior to the stone falling, but the stone on being jowled was thought to be safe. After the stone had fallen, a joint at an angle to the face joint, and running into it, was to be seen. Above the stone there was a free parting. It is remarkable that the stone stayed up at all. It was an error of judgment on the part of the men not to have taken it down before proceeding with other work
If you are researching Michael Hoban (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||