logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Donate to support the Museum
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Individual Details   Individual Details  
 


James Ward

Age:   22
Died:   15th Sep 1905
Accident:   15th Sep 1905
Year Born:   abt. 1883
Colliery:   St. Helen's, Workington
Company:   St. Helens Colliery and Brickworks Co., Ltd.
Occupation:   Labourer
Notes:  
Buried:   [not known]
Category:   In Shafts :: While ascending or descending by Machinery

Description

A shaft 17 feet in diameter and 130 fathoms deep was being fitted up for coal drawing. Each cage ran in to wire rope guides, two on each side of the cages, placed about 10 feet apart, the cages were 13 feet 4 inches long and were to carry three tubs placed end to end on a single deck. At 83 fathoms from the surface a mid landing at the Main Band was being fitted up; four channel irons for each cage, 40 feet long, extending above and below the landing, were being bolted to four girders on each side and four centre girders, and on each side of the cages, outside the thimbles of the rope guides, slippers were fixed to enter these channels, which were splayed out at the ends, so as to steady the cages at the landing. The centre girders were fixed and the girders at one side were in position but not wedged tight, and the channel irons on this side were being bolted up. Deceased men and a shaftman were working from the cage top and had gone to the surface for more bolts and were descending again on the cage top when the cage, on entering the channel irons, caught something and stuck, and the six cage chains dropped a foot or so, and deceased fell to the shaft bottom, the shaftman saving himself by clutching the chains. The engineman felt the loss of weight and at once tightened up the chains. A crab rope extended down the shaft to the girders and was lashed to a centre girder by a hemp rope. This rope was clear of the cage when at the girders, but higher up it came in contact with it. The lashing was intact, and it did not appear that this rope had any connection with the accident, although the banksman stated that he saw it twisted round the winding rope. The winch to which the crab rope was attached was found to be pulled forward, but it could not be proved when this had happened. The winding rope was new and its twist was stated to deflect the cage 2½ inches


Mines Inspectors Report Entry


Sources

Researchers

If you are researching James Ward (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.

What is your name?
What is your contact email address?
What is your research interest?

 

Return Return   Return Return to Top

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Jan 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print