|
William Killen
Watergate Colliery Explosion. This explosion occurred at the face of the brushing of the main gateway of a district of longwall workings in the Yard Band, and was caused by the two parts of a safety lamp becoming detached while the lamp was in an inflammable mixture. The seam is two feet thick and has an inclination of one in seven, the main gateway going to the full rise. It was brushed four feet six inches above the coal in the roof stone, and to within four feet of the coal face, and it was in the face of the brushing that the gas lay, tailing back a few yards. A sufficient current of air traversed the faces, passing the main gateway but not ventilating the brushing. A deputy making his inspection before the entry of the workmen found gas at the place and fenced it off. He reported this in writing in the report book and also verbally informed William Petrie, another deputy, who, accompanied by deceased, went to the place about 9 a.m., and took an axe and saw and some canvas brattice with him to erect a hurdle screen to remove the gas. Petrie was testing the gas, using deceased's lamp, when the explosion occurred, and they were both severely burned; two drivers a short distance from them were also slightly injured. Mr. Abbott happened to be at the colliery on the day of the explosion and was able to inspect the place within a few hours of its occurrence. Petrie was not sufficiently recovered to give evidence at the inquest, but from statements both he and deceased made to the manager and under-manager on the day of the accident it was clear what had occurred. As a preliminary, Petrie was testing the gas, and as he found it difficult to reduce the flame of his own lamp, he was using deceased's, and in order to understand what followed it is necessary to describe the lamp, which is similar to the other lamps used in the pit. The lamp was a Protector lamp, made by the Protector Lamp and Lighting Company, Limited, and is shown on Plate II. It burned colzalene and could only be lighted by electricity after the two parts were screwed together, and when unscrewed the light was extinguished. It was locked by a lead p lug. It was not provided with a pricker, and in order to adjust the flame the bottom of the lamp could be screwed up or down a few turns, but unless the lead plug was removed and the locking arrangement drawn back on the brass rivet it was not supposed to be possible to actually separate the two parts of the lamp, but this is what Petrie did; he was attempting to reduce the flame and went on unscrewing until the bottom fell away and the explosion followed. On examining the lamp after the explosion it was found that owing to strain on the rivets the locking arrangement was bent back and the lamp could be completely unscrewed without interfering with the lead plug. At my suggestion the manager made a series of tests with deceased's and other lamps and found:— (1) On unscrewing 30 lighted lamps they were all extinguished during the operation. (2) Deceased and Petrie's lamps were tested in a stationary mixture of lighting gas and air and did not pass flame. (3) Deceased's lamp was unscrewed while in an explosive mixture of lighting gas and air; in all the five tests made the lamp flame was extinguished, and in three of them the outside mixture was ignited. There seems little doubt that while Petrie was unscrewing the lamp to lower the flame, gas was burning in its upper part, and when the bottom fell away flame passed to the outside by the tube up which the wick holder of the bottom part of the lamp passed. This tube is large enough to admit the passage of an ordinary pencil. Since the accident the locking arrangements on the lamps have been strengthened so as to prevent a similar occurrence in the future.
If you are researching William Killen (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Jan 2023
|
Search |
|
|||