|
John Size
No. 483 on the list occurred at Horden Colliery, belonging to the Horden Collieries, Ltd., on November 28th, and caused the death of a sinker. Three shafts are being sunk at this colliery, and the one in which this accident happened is known as the South pit, and was then 100 fathoms from the surface, and employed 12 sinkers in the bottom. By some means, which is not very clear, the winding engineman in lowering the kibble instead of stopping at the usual steadying mark, which was 33 feet from the bottom, until he received a signal to lower it, ran it into the shaft bottom and killed one of the men. After the accident the engineman made a statement to the engineer ; he said that he had been running rather too hard before the kibble got to the steadying mark, and he then applied steam against the engine to check it, and this slackened the speed, but before he got to within a few feet of the steadying mark he eased the brake, and put the reversing handle over, past the middle notch, when the throttle valve flew open and the kibble went hard into the bottom of the shaft. Whether the accident was caused in the way the engineman described, or it was due to his having allowed the engine to get into too great a speed, and when he attempted to put the reversing handle over and apply steam against the engine he had opened the throttle valve before he had got the handle quite over, and thus put the steam with, instead of against, the engine it is difficult to say. The throttle was carefully examined after the accident and found to be in good condition, and the engine, drum, brake, and signals were also found to be in working order. At the inquest the jury returned a verdict of "Death from misadventure, caused by a momentary mistake on the part of the engineman, but we acquit him from blame." At the request of the jury the engineman was cautioned by the coroner to exercise all the care be possibly could in future, and I hope he, and other enginemen will follow this excellent advice. This engineman, previous to this accident occurring, had a good character, but in this case, whatever caused the accident, there is no doubt he was running the engine at a greater speed than he should have, to work with safety.
If you are researching John Size (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||