logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Donate to support the Museum
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Individual Details   Individual Details  
 


William James Curry

Age:   25
Died:   17th Feb 1900
Accident:   17th Feb 1900
Year Born:   abt. 1875
Colliery:   Easington
Company:   Easington Coal Co., Ltd.
Occupation:   Sinker
Notes:  
A full kibble of stones was taken up too high, the detaching hook acted alright, but one of the links below it broke, and the kibble fell into the bottom of the shaft and killed these two men.
Buried:   [not known]
Category:  

Description

No. 78 on the list occurred at Easington Colliery belonging to Messrs. The Easington Coal Co., Ltd., on February 17th, and caused the death of two sinkers and injury to another.

This accident was primarily caused by an overwind, but the real cause was the breaking or opening out of the link which joins the spring hook to the chain below the detaching hook.

There was a detaching hook on, and it acted satisfactorily, but the overwind being a rapid one the momentum carried the kibble, which was a full one, up a considerable distance, and the strain when it fell back was such that the link either broke or opened out at the weld ; the kibble then fell to the bottom of the shaft, a distance of about 70 yards, and either it or the stones in it caught and killed two and injured another of the men working there.

The evidence of the engineer at the inquest gives the particulars of the accident, size of link, kibble, load, &c., so clearly that I give an extract of it. He said

"The sinking shaft is down about 70 yards, and it is 20 feet diameter. The kibble is 4 feet diameter by 4 feet deep, and it has an iron bow attached to the centre, to which is permanently attached a shackle by a bolt. This shackle is made of B B B iron. The accident was caused by one of the links in the chain breaking; it is 1 inch diameter and made of B B B iron, and has only been in use a week. It has given way at the weld. The weight of the kibble filled is about 2½ tons.

"The engineman in bringing the kibble out of the bottom of the shaft did not stop it at the right place and there was an overwind; the detaching hook acted all right and liberated the rope, but the jerk back of the kibble broke the link, and the kibble fell back into the shaft bottom and killed the two sinkers and injured a third one.

"The winding engine, which is set back 66 feet from the shaft, has a pair of 26-inch diameter cylinders by 5 feet stroke, and the drum is 15 feet diameter. There are marks on the rope and the drum to indicate to the engineman the position of the load, and there is also a waiter on who has a speaking tube to the engineman.

"There was no roof on the engine-house, and the weather was wet at the time the accident occurred. The brake is a strap one, half round the underside of the drum, and it is cleaded with hemp rope; on the drum it is bare metal. It would be fair to assume that the hemp rope would probably be wet. I have not had any complaints of this drum or brake. Having regard to the weather and ordinary conditions of sinking, I think the brake is sufficient, but there probably might have been a better. The distance from the saddle boards to the bottom of the bell of the detaching hook is about 20 feet. The light in the engine-house was very good; there was an incandescent electric lamp of 25 candle power just over the drum, and there was an arc light between the shaft and the drum.

"The chains are examined every day, and a report of such examination is entered into a book kept for the purpose; the report made on the day before the accident occurred states that the chains were all right. If there was a defect in the welding, it would be difficult to detect, and I do not think the makers of the chain when it was being made would be able to detect a defect if it was what is known as a shell weld. The breaking strain of this chain should have been 28 tons."

The night being a wet one and the engine-house not having a roof on would cause the brake to have less power, and the engineman said at times the exhaust steam from another engine blew across his sight and he lost sight of the token on the rope. There was also no indicator on the engine itself to shew the position of the kibble in shaft.

The management promised that these matters should have immediate attention and he remedied at once.


Mines Inspectors Report Entry


Sources
  • 1900 Mines Inspectors Report (Cd 536), Durham District (No. 4) by R. D. Bain, H.M. Inspector of Mines, Page: 18 Where to find this report
  • 1900 Mines Inspectors Report (Cd 536), Durham District (No. 4) by Ronald D. Bain, H.M. Inspector of Mines, Page: 42, Accident Number: 78 Where to find this report

Researchers

Email  Researcher  Date  Interest 
Bryony Jubb   17 Aug 2010 

Family tree research. William James Curry was son of my Great-Great-Great Grandfather John Curry, and brother to my Great-Great Grandfather Samuel Curry. Another brother Reuben Curry is also mentioned on this website as having died in a further such accident.


Lynda Thom [ Curry]   14 Oct 2012 

My Grandfather was Samuel Curry brother of William James Curry and Reuben Curry.


Alan Jones   04 Jan 2014 

William was the husband of my Great Grandfather's sister (Mary). I know a lot about her but very little about William and would be delighted to hear from anyone who has information about him. Alan.


david lyne   05 Feb 2017 

I am looking for information about my grandmother and her family,she was born in Easington in 1881 and her name was Isabella Curry.


Barbara Bunton   19 Nov 2017 

William James Curry was husband to my husband's Great Aunt "Polly" Mary Ann (nee Bunton)


If you are researching William James Curry (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.

What is your name?
What is your contact email address?
What is your research interest?

 

Return Return   Return Return to Top

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 30 Apr 2023

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print