|
Arthur Thomasson
The most serious shaft fatality occurred at Peelwood Colliery, and was of an unusual character. A pitman and his assistant were working in an upcast shaft repairing a leak in the compressed air pipes at a point 71 yards from the bottom of the shaft, and in order to do this were working in a bricking box suspended by means of a rope 200 yards long, attached to the bottom of one of the cages. During ordinary winding the cages only descended to a depth of 408 yards. The rope guides for the cage from which the bricking hoppit was suspended reached to the Arley Seam, 601 yards from the surface. The three guide rods for the other cage terminated 10 ft. below the Cannel seam mouthing and were kept tight by cheese weights, 27 in number, having a total weight of two tons. While working in the hoppit one of these guide rods broke and allowed the weights to fall on to the bricking box and both men were precipitated to the shaft bottom and killed. It was afterwards found that the breakage of the guide rod was due to corrosion, although it had only been in use three months. The guide rods were kept well greased, but the water was extremely acid.
If you are researching Arthur Thomasson (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 15 Mar 2023
|
Search |
|
|||