logo Museum
Museum
Friends of Durham Mining Museum
Events Calendar
e-Books and Books for sale
Photograph Gallery
Document Archive
Master Name Index
What's new in the site
Donate to support the Museum
Mining
Mining History
Colliery Index
Colliery Maps
Company Overviews
Who's Who
Mineral Information
Managers Certificates
Educational Material
Bibliography
Statistics
Workers/Employee Lists
Notes for Family Historians
War Service information
Disasters
Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials
Awards for Gallantry
On this day ...

Links to other sites of interest
Industrial Heritage Days Out
Former www.pitwork.net web site

Index to site

Contact and address details

Share Page with Social Media

Share on Facebook

Share with Reddit

Share on Delicious

  Individual Details   Individual Details  
 


Henry Johnstone

Age:   20
Died:   1st Jun 1911
Accident:   1st Jun 1911
Year Born:   abt. 1891
Colliery:   Auchengeich
Company:   James Nimmo and Co., Ltd.
Occupation:   Miner
Notes:  
The south section of the coking coal seam was holed by means of a Bar coal cutter, and the motive power was electricity, three-phase current of 440 volts. The cable conveying the current was armoured throughout, and was 580 yards long to the gate end box, and from the gate end box the trailing cable was also armoured. The system of earthing was common to all the electrical plant in use in the mine, and the various machines were connected right to the surface, where there was a copper plate buried in the earth. At the time of the accident the current was on up to the gate end box, where it was switched off, and during the shift a bad leak took place and the armouring became alive, as the leak did not go to the surface, the result being that the current travelled along the outer covering, through the gate end box, and on to the trailing cable, which was coiled up at the side of deceased's drawing road. He came out with a loaded tub to the entrance of the main road, and on stepping on to the cable to pass his tub, he got the full shock, and falling on the cable lay there for at least 20 minutes, and when found was quite dead. Searching investigation was made to find out why the current did not run to earth, and it was only discovered, after every attempt had been made to find out the cause, that a labourer, while he was engaged in cutting a trench in the vicinity of the copper wire, leading to the copper plate, had cut the wire, thinking it was an old piece, which had been thrown among the debris he was removing
Buried:   [not known]
Category:   Miscellaneous Underground Accidents :: By Electricity

Sources
  • 1911 Mines Inspectors Report (Cd 6237), Scotland District (No. 1) by W. Walker, H.M. Inspector of Mines, Page: 73, Accident Number: 6 Where to find this report

Researchers

If you are researching Henry Johnstone (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.

What is your name?
What is your contact email address?
What is your research interest?

 

Return Return   Return Return to Top

 

mail
Mail:
Webmaster
Back
Back
Home
Home
Open Government Licence   Contains public sector information licensed under the Open Government Licence v3.0.

Copyright © 1999-2024 by The Durham Mining Museum and its contributors
Registered Charity No: 1110608
Page last updated: 31 Dec 2022

Privacy Policy
 
Terms & Conditions
 
Search
Search
Print
Print