











































|
| |
Individual Details |
|
Individual Details |
|
 |
|
 |
Thomas Bowers
| Age: | 40 |
| Died: | 8th Dec 1908 |
| Accident: | 8th Dec 1908 |
| Year Born: | abt. 1868 |
| Colliery: | Shelton Deep |
| Company: | Shelton Iron, Steel and Coal Co., Ltd. |
| Occupation: | Collier |
| Notes: | On the day of the accident deceased and his mates had been engaged in moving up the landing in a jig in the Cockshead where the inclination is 1 in 4. A length of ripping, which at this point was 5 ft. in thickness, had been blown down on the previous night. During the first part of the day the debris from the ripping was being removed and at 9.30 a.m. deceased set a bar under the ripping and about 1 ft 6 ins. from its edge. A post was then drawn at a point about midway between this bar and another bar 5 ft. distant from it. This caused a little weighting of the roof but it was said that it soon settled and went quite still. About half an hour later deceased was standing in the jig just beneath the edge of the ripping handing up a prop to his mate when a large lump of stone, weighing between 4 and 5 tons, fell from the edge of the ripping on to deceased causing instant death. The bar set near the edge of the ripping was reeled by the fall which came from a longwall break. It is evident that an ordinary setting of timber was not sufficient in this position to support so great a thickness of loosened roof at this inclination. It is probable that an additional prop at each side of the jig might have prevented the accident |
| Buried: | [not known] |
| Category: | Falls in the Mine :: Falls of Roof |
- 1908 Mines Inspectors Report (Cd 4672), Stafford District (No. 9) by Hugh Johnstone, H.M. Inspector of Mines, Page: 36, Accident Number: 3 Where to find this report
If you are researching Thomas Bowers (e.g. for family tree purposes) and you would
like to hear from others with the same interest then please complete
the details in the following form. We will show the information you provide
on this page so that you can be contacted.
 Return
 Return to Top
|
|