|
James Mitchell
No. 53 on the List. — This was a very unusual accident and was caused by a slip of whinstone from the side of the shaft. The shaft is 29' 0" by 11' 6" internal dimensions, and is being sunk to the Dunfermline Splint coal lying at a depth of 700 yards. At the time of the accident 296 yards had been sunk, the last 72 yards in whinstone. The sides and ends were barred and had the usual wall-plate and buntons, and when the slip took place the barring was within a few feet of the bottom. The work was carried on by three shifts daily with an aggregate of 54 persons, divided in about equal numbers on each shift. Owing to the hard nature of the metals, Ingersoll drilling machines were in operation, and the blasting was heavy as many as 24 shots, charged with Gelignite, being fired in one round. On the afternoon shift 11 men were in the shaft bottom, and were preparing to stop work for the week end, when suddenly the shaft collapsed, and all were more or less covered with the debris. The cause of the collapse was due to a fracture in the east side of the shaft, which was unseen, and in the course of sinking the principal support at the bottom end of the fracture had been taken away ; the vibration caused by the heavy blasting tended to separate the mass at the fracture from the main body. The last bunton was some distance above the top end of the fracture, but it is very doubtful if the buntons put in at the usual intervals would have prevented the mass from slipping. Whinstone is a very hard substance, and it is not usual to bar it when it is met with in the course of sinking.
One case was of rather a sad nature. While working at the coal face, a miner had a finger badly injured causing him to leave off work, on reaching the shaft to be raised to the surface he felt faint, but after some attention and a rest he got on to the cage ; with him was his brother and a drawer and while being raised and when near the surface he apparently fainted and falling he slipped past between the cage and side of the shaft and was precipitated to the bottom.
If you are researching James Mitchell (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||