|
G. Picard
G. Picard, a carpenter, was killed at Mirfield Colliery, belonging to the Mirfield Coal Company, in the following manner: In the afternoon of the 14th March, he, together with C. Crawshaw, were in the cage in the engine shaft preparing to couple up some pipes. The cage was about 4 feet X 3 feet, and there were two wire-rope conductors on one side of it. The men had taken off the "thimbles" or "slippers," so as to enable them to pull the cage to one side of the shaft, which was 12 feet in diameter. Having completed their work and refastened the "slippers" they gave the signal to lower, but the cage began to descend on one side only, seeing which, and noticing that the bottom "slipper" had stuck, they at once signalled to stop. The cage was at this time, owing to the above reason, tilted, one side being 18 inches lower than the other. A signal was now given to raise the cage, when immediately the "slipper" which held it broke off, the cage jerked and vibrated, and Picard was thrown out. He fell a distance of about 100 yards, and was, of course, killed. He had worked a long time in shafts, and was considered an experienced man. Crawshaw, when he saw the position of the cage, had taken the precaution to put one arm round the conductor. Probably Picard had hold of the signal wire.
If you are researching G. Picard (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||