|
John Ramsay
In shafts, by seven accidents eight lives were lost. The third — No. 15 — took place under unusual circumstances. Some years ago two shafts were sunk or extended to a lower seam, — about 13 fathoms under the seam, which at the time was worked, — but no excavations were made in it. The upper seam continued to be worked, and the part of the shafts which had been extended gradually got filled with water, mud, and the usual debris of the mine. It having been arranged that the working of the lower seam should be proceeded with, the deceased contracted to clear the shafts of the mud and debris which had collected in them, the work to be done during night, and while the day workmen were absent. After clearing out the "rise" shaft, — about 12 feet distant from the "dip" shaft, — they proceeded to drive a passage from it through the coal, to connect it with the "dip" shaft, the intention being to draw off the mud and debris through this passage, and send it up the "rise" shaft in hutches. During the night of the accident they cut through on to the corner of the "dip" shaft and made an opening sufficiently large to admit a shovel, but found that, although there were eight fathoms of mud and one fathom of water in the "dip" shaft, the mud would not come freely through the opening. They continued to work for upwards of three hours, when the engineman gave notice for a change of shift; but after a time, on getting no reply, the fireman and others descended to the upper working and discovered that the cage in the bottom was covered with mud. Steps were then taken to clear out the mud, and the bodies of the two men were found in the cage. On examination it was discovered that the opening had been enlarged, and was now 29 x 34 inches. The pressure of mud had suddenly overcome the resistance at the mouth of the hole, filling the passage and covering the cage before the deceased had time to escape. The system adopted for clearing the shafts in this case might have been carried out safely if the opening had been kept sufficiently small to guard against any sudden influx of mud; but a simpler and more effective course might have been taken by clearing out the shafts before connecting them.
If you are researching John Ramsay (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||