|
James McCartney
Accident No. 8, schedule No. 1, was occasioned by falling from a midworking. There were two seams of coal being worked in this shaft. The upper at 46 fathoms and the lower at 66 fathoms. The cages were raised from and lowered to the lower seam, but it was the practice when a hutch required to be raised from the upper seam that a signal was made to the engineman to stop the cage at it. It appears that the deceased, who worked in the upper seam, had made the necessary signals in this case. There was no person along with him at the time, but it was found that the cage had accordingly been raised and rested at the level of the (major) upper seam, and he had removed the empty hutch which was upon it. However in returning with his full hutch to place it upon the cage, he had inadvertently pushed it in to the wrong division of the shaft, instead of the one where the cage was rested, and fell down with it to the bottom, a distance of 20 fathoms. It is always dangerous to send away materials from a midworking, where, as in the present case, there is no scaffold to prevent persons or hutches from falling, and under such circumstances the safe way is to arrange a scaffold over one of the divisions of the shaft at the upper or midworking, leaving the other open but fenced off so as to prevent any person from unknowingly passing in to it. There were gates on the pit at the upper seam, but there was no particular person to look after them.
If you are researching James McCartney (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||