|
William Sharpe
No. 12 accident, schedule No. 2, was occasioned by falling from a mid-working. In consequence of a dislocation near to the bottom of the pit there are two loading places, the upper being 5½ fathoms above the other. The deceased was a drawer, and as the works were near to the pit bottom, and merely preparatory, he drew from both mines. On the day of the accident he had gone in to the high mine to clear away the stuff which had accumulated in his absence ; it was only a few yards off the shaft, and it would appear that during the time he had been engaged filling his hutch, the cage had been lowered back to the bottom. On returning with the loaded hutch to the cage, he had not taken the precaution to observe whether it still remained at that level, and pushing forward, he fell with it to the bottom. Where seams are worked in a shaft at different levels, and where it is sometimes difficult to regulate the quantity from each, it may be convenient to keep the ropes winding both from the bottom. The practice however, is always attended with a certain amount of danger ; and in cases where it cannot be avoided, the suggestions referred to in accident No. 35 might be advantageously practised.
If you are researching William Sharpe (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||