|
Robert Clarkson
No. 12 accident, schedule No. 1, was occasioned by the deceased's cravat getting entangled with the revolving shaft of a small screwing machine, and causing strangulation. The deceased was the son of the foreman of blacksmiths at the colliery, and he had been employed about the works, assisting in the smiths' shop and otherwise, for nearly 12 months. On the day of the accident he had been engaged screwing nuts at a small screwing machine, near to the workshops, driven by hand. There was no person close by him at the time the accident happened ; but it was evident from the state in which he was afterwards found that it had been occasioned by his cravat getting entangled with the spindle when it was revolving, and being wound round it, he had got stupefied or strangled before the impetus of the fly wheel could be controlled. The machine is exceedingly simple in construction, easily worked, and entirely under the control of the person engaged at it.
If you are researching Robert Clarkson (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||