|
Peter Bennet
No. 21 accident, by the pinion wheel of a single power crane getting out of gear at a sinking pit. The deceased, who had been one of the contractors for sinking the pit, was a short time previous to the accident appointed to superintend and assist in placing a set of pumps in it. It would appear he had arranged the cranes and ropes, and at the time of the accident he and another workman were being lowered on a scaffold in the shaft by a crane.
The clutch or guard which kept the pinion shaft in gear, was raised by the rope rubbing against it as at A Fig. 1, and the continued strain afterwards of the rope upon the shaft, drove it out of "gear." Consequently the drum was unwound at a rapid velocity, the scaffold was upset, and the unhappy sufferer was precipitated to the bottom. If the rope had been placed according to the usual practice, upon the drum, so as to underwind instead of to overwind, it could not have got into contact wiih the pinion shaft, and the accident would have been prevented. The attention of the deceased had been directed by his fellow workmen to the propriety of arranging the rope upon the drum to underwind, but he made light of their suggestion, and the accident took place when he was in the act of being lowered a few minutes after.
If you are researching Peter Bennet (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||