|
J. Wright
No. 5 Accident. The chain which attached the rope to the cage was made of 5/8 iron ; a link of the single part of the chain broke when he was descending the shaft. The chain had been drawing coals part of the day, and, only a few minutes before, eight persons had ascended the shaft upon it. The fracture was new, but crystalline ; the other part of the link, when tested, broke fibrous. The chain had only been at work a short time. Chains daily at work are liable to become crystalline in a short time, however good the quality may be when made, and it is desirable to anneal them from time to time. A simple method of annealing is to heat them to a red heat in a wood fire, then bury them when hot in sawdust to cool. The fibre of the iron is restored, and any flaw in the welding may be readily discerned. Every pit should be provided with spare chains ready annealed, to change the working chains for annealing, and a careful examination link by link.
If you are researching J. Wright (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||