|
Robert Henderson
Accident No. 6, schedule No. 2, happened at a sinking pit, and was occasioned by a scaffold getting disconnected in the shaft. This accident, by which three lives were lost, is an exceptional one, and I do not recollect a similar occurrence during my experience. The shaft was sunk by contract, by an intelligent sinker, of considerable experience, and well acquainted with such work. He was in attendance at the pit mouth on the day of the accident, and, according to his own statement, they were at the time engaged connecting a "set" of pump rods in the shaft. The deceased, three sinkers, were lowered in a kettle by the engine to the point where the connexion required to be made, and where a scaffold, suspended from a crane at the surface, was hanging. It appears that they got out of the kettle safely on to the scaffold, and signalled it away.
It was raised accordingly, but in passing the muzzle pin, which connected the scaffold to the crane rope, shown on hand sketch, Fig. 2, the iron hoop of the kettle caught the head of the muzzle pin and drew it out, disconnecting the scaffold, which fell away. There was a quantity of water in the shaft, consequently it was some time before the bodies could be recovered ; one of the sufferers was the contractor's son. In discussing with the contractor after the accident as to the insecurity of the muzzle pin, it being secured or kept in place by a strip of bucket leather, he explained that he put in the leather for safety, as being less likely to catch their clothes while being raised and lowered past it than a split iron cutter. Often a mystery exists as to the cause of these uncommon occurrences. In this case, however, there was no difficulty ; the bolt was found at the bottom of the shaft with the leather in it entire. A split iron cutter is often used for such purposes, and forms a simple connexion. Such a contrivance would have been effectual in preventing this accident, but for general use I believe that a nut screwed on to the end of the muzzle pin, and kept in place by a small rivet, is the most safe and secure.
If you are researching Robert Henderson (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 30 Apr 2023
|
Search |
|
|||