|
John Hutchinson
Accident No. 14, Schedule No. 1, was occasioned by the deceased getting entangled with the signal wire in the shaft, while about to repair it. On the day of the accident the "signal wire" in the shaft had broken, near to the connexion formed with the signal hammer at the surface, and the deceased, who was one of the underground assistants, repaired it. I understand that after the repair had been made, the pit had not been worked more than an hour, when the wire broke a second time. The deceased and a neighbouring workman, for the purpose of again repairing the wire, had gone on to the cage, and were in the act of being drawn up when the broken wire, hanging partially loose in the shaft, got entangled with the cage, and in some way coiling round the deceased, he was drawn off the cage, and fell down the shaft a distance of 50 feet or thereby. It was an overlook on the part of the deceased to attempt to go up the division of the shaft where the wire was hanging loose and broken, without first communicating with the engineman as to the state of things, so that he might have raised the cage slowly, and taken all necessary precautions.
If you are researching John Hutchinson (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||