|
Andrew Connal
Accident No. 10, Schedule No. 1, was occasioned by some misapprehension of signals on the part of the engineman. In this case there were two seams of coal being worked at different levels. The deceased was a roadsman and general assistant, and had occasion to visit both seams. It appears that on the morning of the accident he, along with the manager, had been "signalled away" upon the cage from the lower seam. It was the intention of the deceased to go off at the upper seam, but from some cause the cage was not stopped at it. The bottomer at the upper seam, on being called upon to signal back the cage to that level, did so, and it was lowered accordingly. At this point some unfortunate misunderstanding as to signals took place, and the engine-man, instead of allowing the cage to remain steadily at the upper seam, raised it while the deceased was in the act of getting off. He was caught between the cage and the side of the shaft, and, after being dragged up a certain distance, fell away from the manager, who had partly a hold of him, to the bottom of the shaft. The opening for getting off the shaft into the upper workings, was narrow and ill adapted for persons going off the cage at, and though it was occasionally used, particularly by the manager and his assistants, it was not the proper inlet from the shaft.
If you are researching Andrew Connal (e.g. for family tree purposes) and you would like to hear from others with the same interest then please complete the details in the following form. We will show the information you provide on this page so that you can be contacted.
|
|||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
||||||||
|
Mail: Webmaster |
Back |
Home |
Copyright © 1999-2024 by The Durham Mining Museum and its contributors Registered Charity No: 1110608 Page last updated: 31 Dec 2022
|
Search |
|
|||