A fire occurred near the bottom of the upcast shaft in the Busty Seam of the Tursdale Colliery, Durham, under somewhat peculiar circumstances. A master-shifter coming outbye just after midnight smelt something burning, and hurried to the downcast shaft to see if any smoke was descending. Finding nothing there he went through the separation doors to the upcast shaft and found a cloud of smoke there. Two men whom he had also sent to investigate, quickly returned and reported that a separation door next to the intake was on fire. All workmen were then brought out of the mine, and assistance sent for from the surface. The Elswick Brigade arrived about 4 a.m., and with a good supply of water the fire was extinguished by about 6 a.m., after doing considerable damage to a length of roadway. The fire had apparently originated at a binding wheel carrying a haulage rope in the intake airway but close to the first of a set of doors leading to the upcast shaft. The cause of the fire may have been due to the wheel rubbing upon the wood frame, or by a piece of hard stone having got trailed into the rope box and so fixed that the wheel or rope may have been rubbing it and causing sparks. As the rope boxes made a connection between the intake and the return it is quite obvious that the fire would travel very quickly along them. It was owing to the promptitude with which the management attacked the fire that the results were not much more disastrous.
Source: 1914 Mines Inspectors Report (Cd 8023)