In my report last year I gave an example of the advantages to be derived from intensive mining. Such methods are rapidly increasing.
The scraper loader conveyor has been introduced into several collieries during the year and its use is extending. The first conveyor of this type used in Great Britain was installed at Seghill Colliery, Northumberland, several years ago.
The scraper is built of steel plates to form two fixed sides and one end hinged at the top so that it can lift and pass over loose coal when it is being hauled inbye, but scrapes the coal along with it when it is being hauled outbye. The scraper is hauled backwards and forwards along the face by a main and tail hauler, and brings to the delivery end all coal which lies or is placed in its track. It is kept in one track by light skeats of wood or iron fixed to a row of props on the goaf side. The haulage gear employs epicyclic gears which admit of instantaneous reversal at each end of the run. The coal is delivered on to a gate-end loader, or, preferably, a trunk conveyor.
The conveyor appears to be giving satisfaction from an economical standpoint, and from the point of view of safety it would appear to have the following advantages :—
(1) It is almost silent in operation.
(2) The driving gear is situated on the mothergate some distance back from the face. This is particularly advantageous where electricity is used in seams liable to give off firedamp
(3) The moving forward of the conveyor is a very simple matter, and there is no temptation for the men employed on the work to knock out props to make their work easier.
(4) The fillers are not hampered by the conveyor when breaking in on a freshly cut face.
(5) Undulating floors and very thin seams are no hindrance to operations.
Transport of coal from the face by means of conveyors is largely on the increase and this departure from the old fashioned method of conveying coal in tubs must in the long run result in fewer accidents and reduce working costs.
Source: 1930 Mines Inspectors Report