At Linton Colliery, Northumberland, a winding engineman, being trained under the supervision of another man, put the engine in motion without a signal from the banksman and before the keps had been withdrawn. Slack rope accumulated on top of the cage resting on the keps, which contained two tubs of stone, before the engine was stopped. In vacating the driving seat to enable the regular engineman to operate the controls so as to take up this slack rope, the man being trained accidentally moved the reversing lever from the neutral to running position. The brake had apparently not been applied, and the engine took up the slack rope violently then raised the cage at a high speed until brought to rest by the overwind prevention device when the "Reliance" capel was above the detaching plate. As the cage fell back, the hoops or rings of the capel were stripped off by catching on the detaching plate, and the winding rope was released. The cage, chains, detaching hook and capel fell to the shaft bottom, breaking the keps as they did so.
Source: 1935 Mines Inspectors Report