Byermoor Colliery
Miscellaneous Notes and Incidents
An unusual occurrence took place at Byer Moor Colliery, Durham, during coal winding operations. When the cages were at the meetings the chain attaching the winding rope to the drum shaft broke at the "lead-in" at one of the arms of the drum, where it passes through a right-angled bend and also makes contact with the cast iron arm of the drum. The metal to metal contact gave rise to considerable wear at the point where maximum strength was required in the chain. The chain had worn a groove in the arm of the drum. The engineman heard an unusual rattle and stopped the engine. It was found that the socket on the drum end of the winding rope had fallen into the drum pit leaving 4½ turns of rope on the drum. Baulks were placed across the pit top and the winding rope clamped at that point. When the detached socket and chain were placed back in position an 8 inch lengthening link was necessary because of the slip of the rope on the drum after the breakage of the chain. It had not been customary to replace these chains when recapping but at all such times in future the chains will be replaced by freshly annealed chains.
Source: 1927 Mines Inspectors Report
index of Miscellaneous Notes and Incidents for Byermoor Colliery
main page for Byermoor Colliery