Surface plants have also come in for overhaul in many directions, the most outstanding innovation being a boiler plant at Ashington Colliery, Northumberland, which presents several features new to colliery practice. The old boiler plant consisted of 30 Lancashire boilers working at various pressures and housed in four separate buildings. The whole of these boilers have been displaced by four Stirling 5 drum boilers fired by the Hopulco Central System for pulverised coal and each with a normal actual evaporation of 33,000 lbs. per hour. Three boilers supply the normal demand during working hours. The plant is designed for a steam pressure of 200 lbs. per square inch, at a temperature of 550° F., at which pressure and temperature the steam is distributed to three points which form centres for low pressure distribution to winding engines, etc., at 75 lbs. per square inch, saturated. The great attraction of this method of steam raising from the colliery point of view is the ease with which the load can be varied to suit altering conditions, and the fact that at night time and week-ends only those boilers actually needed at the time need be fired while the full output can be obtained at less than half-an-hour s notice by simply relighting the boilers which were put out when the load was reduced.
Source: 1927 Mines Inspectors Report