Museum
Friends of Durham Mining Museum
Events Calendar
Join our Friends!
Newsletter Contents
Items for sale
Items for Sale
e-Books
Photograph Gallery
Document Archive
Discussion Forums
What's new in the site

Mining History
Colliery Index
Colliery Maps
Educational Material
Bibliographye
Workers/Employee Lists
Notes for Family Historians

Disaster Reports
Names of those killed
Disasters in the 1700s
Disasters in the 1800s
Disasters in the 1900s
Memorials

Links to other sites of interest
Industrial Heritage Days Out

View our Guestbook

Index to site



Mail: Webmaster


Chapter V

THE CONVEYOR AND OTHER WORKERS

A   The Deputy

Make sure that all the work is carried out safely.

B   The Shotfirer

1. See that the alignment of the conveyor is not upset by shotfiring.

C   Cuttermen

1. Where anchor props have to be removed at the tension end, see that they are replaced in their original positions and that the belt is correctly tensioned as before.

2. Do not stay the cutting machine to any of the conveyor structure, or the alignment of the conveyor may be affected.

3. Replace correctly any of the intermediate structure that is accidentally forced out of position.

4. Where gummings have to be cast into the goaf do not pile them on top of the belt but throw them over the conveyor into the goaf.

D   Fitters

1. Do not load coal on to a stationary belt.

2. Do not place lumps of coal on the belt so large that they will foul the supports or the roof.

3. Keep the following parts of the conveyor as clean as possible by shovelling up all small coal

(a) Tension End.

(b) Sides of the conveyor.

(c) Engine End.

4. Where structure permits, shovel small coal from under the. top belt so that the belt runs on top of the rollers, not on the coal.

E   Prop Withdrawers

1. Do not pile the belt up with broken timber or bent steel bars, as they may become fast when the belt is run. Run off the damaged props and bars at the end of the shift after seeing that they are laid properly on the belt.

2. Do not set the anchor props for the sylvesters so that on withdrawal of a prop from the goaf, the sylvester chain will damage the structure or move it out of alignment.

F Belt Attendants

1. Examine the gearbox for overheating occasionally during the shift.

2. With electrically powered conveyors place the isolator switch of the gate end box in the "off" position and place a "DANGER" notice on the switch gear when a conveyor is stopped for repair.

NO PERSON SHOULD:-

1. Interfere with any machine by removing or discarding any bolts or nuts that may be used on the machine.

2. Remove any cover plate or fence.

3. Put stays between roof and top of motor or gear case.

4. Put packs under gearcase or motor.

5. Use the power to thread the belt.

Prev Page Return to Top of Page Next Page



Back

Home
Copyright © 1999-2012 by The Durham Mining Museum and its contributors
Page last updated: 01 Jan 2008

Search

Print