Revival Of The Iron Trade. — Great Building Of Steam-Engines In The North Of England. — Increasing Depth Of The Pits. — Various Appliances For Ventilating The Mines. — Explosions Of Frequent Occurrence.
In the early half of the eighteenth century the iron trade of Britain was at an extremely low ebb. The charcoal iron manufacture was fast dying out for want of fuel; the manufacture of iron with coke or coal was yet only in its infancy. The total make of pig-iron in England in 1740 is set down at 17,350 tons.
It is generally agreed that the first notable revival of the iron trade took place at Coalbrookdale Foundry, in Shropshire, but a considerable discrepancy prevails as to the precise date when charcoal was superseded by coal fuel in the smelting operations. It appears that the manufacture of iron with coal (or coke) commenced here in the time of the first Abraham Darby, who settled at Coalbrookdale in 1709 and died in 1717. Charcoal was employed in the blast furnace when Darby first began operations, but soon afterwards coke was used — according to Scrivenor in 1713 — the fuel employed in smelting a charge of ore consisting of five baskets of coke, two of brays or small coke, and one of peat. The quantity of iron produced at this period, however, was insignificant, only reaching from five to ten tons per week, and it was not until long subsequently that the production of pit-coal iron at Coalbrookdale assumed any importance. The second period appears to date from 1730-5, about which time a more powerful blast was obtained by the erection of a Newcomen steam-engine to provide an increased supply of water for driving the blast water-wheel.
For a long period Coalbrookdale Foundry continued one of the principal seats of the pit-coal iron industry, but the success achieved here led to the establishment of many new iron-works in different parts of the kingdom for the manufacture of iron by the same process. The greater abundance and cheapness of iron which ensued led to a rapid extension of its use.
Not only were the Coalbrookdale Company the first to manufacture iron with coal on a large scale, but they took the lead in promoting the more general use of cast-iron as a substitute for wood and other materials. It being contrary to the principles of the Darbys, as members of the Society of Friends, to accept contracts, however lucrative, for the manufacture of engines of war, this firm developed the application of iron in the arts of peace. Hence, while the proprietors of the great foundry at Carron became celebrated for their Carronades or "smashers," the Coalbrookdale firm are famous as the constructors of the first iron railways and the builders of the first iron bridge; •and their foundry became the great emporium for cast-iron cylinders for steam-engines, cast-iron pipes for mine-pumps, and useful articles of all descriptions made of the same material.
About the year 1740 a commencement had already been made to use cast-iron cylinders in steam-engines (all the earlier cylinders having been made of brass), and there is little doubt that the facility with which large iron cylinders could from this time be obtained helped on to a great extent the marked increase in the building of steam-engines which took place shortly after the middle of the eighteenth century..
Prominent among the builders of engines, as well as in promoting other improvements in the mechanical engineering of collieries in the Newcastle-on-Tyne district at this period, was William Brown, an eminent colliery viewer. Brown was brought up at Throckley, a village situated about six miles west of Newcastle, and was of an aspiring mind and endowed with much natural ability. The means of acquiring a knowledge of the various branches of colliery work were few at this time, but by dint of careful observation and making the most of such opportunities as he had, Brown was already possessed of superior attainments at an early period of his life, and subsequently succeeded in raising himself to the first position among the colliery viewers of his day.
At the outset of his career he had the good fortune to be taken by the hand by Mr. Bell, a gentleman living in the neighbourhood, who leased Throckley Colliery, and appointed him manager, with a handsome salary and one-fourth share of the colliery. On obtaining this position, in 1756, Brown immediately proceeded to erect a steam-engine at the colliery; and no sooner had he shown his engine-building capabilities at Throckley, than his services were in great request for the building of engines to drain other collieries in the district, In the two following years he built six more engines at different collieries; and in the short space of ten years after commencing practice he had fitted up no fewer than twenty-one steam-engines, including three at collieries in Scotland. Subsequently he built several others.
In the meantime other engineers had in like manner been actively engaged in erecting engines at collieries in the Newcastle-on-Tyne district; so much so, that from a list of these machines preserved in Mr. Brown's books, dated 1769, we find that nearly one hundred had then been built at the northern collieries.
The most remarkable engine and pumping establishment of this period was at the new colliery of Walker-on-Tyne, recently sunk to the Main Coal seam at a depth of one hundred fathoms — the greatest depth yet reached in the Newcastle district. Considering the date of its erection (1763), the engine at Walker was of colossal proportions, its cylinder (brought from Coalbrookdale Foundry) being seventy-four inches in diameter and ten and a-half feet in length. To supply it with steam four large boilers were provided, three of which were always in use. All the pipes in the shaft were made of cast-iron. This engine was pronounced "the most complete and noble piece of iron-work that had up to this time been produced."
The increasing depth of the pits in the North of England necessitated a number of alterations in the methods of conducting the colliery operations. The sinkings, or "winnings," being more tedious and costly, fewer shafts were employed and a larger area was worked by each establishment. The shafts themselves also were made larger, to admit of both pumping and winding being carried on, as well as to allow of the employment of larger coal-baskets.
Sometimes, but rarely, they were made oval in form; usually they were circular, and of a diameter of ten or twelve feet.
To compensate for the greater distances over which coal had to be conveyed underground, wooden railways, resembling those on the surface, were introduced into the mines; and horses were applied on the main underground roads to haul four-wheeled trains carrying one or two baskets of coal.
As the shafts became fewer and deeper, the difficulties arising from the abundance of fire-damp became more and more formidable, and various measures were resorted to, to promote the safety of the collieries. Stoppings of a more substantial character, built of brick and lime, were employed to guide the ventilating current; being first used at Fatfield Colliery, on the Wear, in 1754. At the same colliery, in 1763, after an explosion by which seventeen persons were killed, steel mills brought from Whitehaven were used for the first time in the Newcastle district; and the system of ventilating by "coursing the air was introduced here about the same time.
Various methods were now in use for producing artificial ventilation: the ordinary arrangement consisting in the employment of a fire-lamp or small furnace to rarefy the air in the upcast shaft. Sometimes, however, the furnace was placed on the surface, at the bottom of a tall chimney communicating with the upcast; an arrangement applied in the North of England for the first time in 1756, at North Biddick Colliery.
At Walker Colliery a different system was pursued, two rotating mechanical ventilators, worked by the steam-engine by means of a train of wheel-work, being employed to produce an air-current as early as 1769. This was the first colliery on the Tyne in which the system of coursing the air was adopted.
Notwithstanding the endeavours which were being made to place the collieries on a safer footing, by employing artificial means to produce a steady air-current to dilute and sweep away the fire-damp, by building more substantial stoppings and coursing the air through all the workings, and by substituting steel mills for candles, explosions took place in one colliery after another, sometimes two or three occurring in a single year. The best means known being ineffectual to prevent these calamities, allusions to them by the public press were regarded with displeasure. Commenting on this matter, the Newcastle Journal, under date 21st March, 1767, makes the following observations
"As so many deplorable accidents have lately happened in collieries, it certainly claims the attention of coalowners to make provision for the distressed widows and fatherless children occasioned by these mines, as the catastrophes from foul air become more common than ever. Yet, as we have been requested to take no particular notice of these things, which, in fact, could have very little good tendency, we drop the further mentioning of it."
So far from being able to cope with the fierce and invisible enemy with which they were brought face to face, the viewers themselves at times fell victims to the fiery blasts which devastated the mines.