breaking weight was 5953* lbs. ; angle of torsion, 4.4. The force required for crushing, 130,860 lbs. — No. 3, Cold-blast Iron: The specific gravity was 7.158. In the tensile test the breaking weight was 23,903* lbs. ; extension, .011, In the transverse test the breaking weight was 7600* lbs. ; deflection, .191, In the torsion test the breaking weight was 5674* lbs. ; angle of torsion, 10.2. The force required for crushing, 87,358* lbs. — Bright: The specific gravity was 7.130. In the tensile test the breaking weight was 23,139* lbs.; extension, .009, In the transverse test the breaking weight was 6394* lbs. ; deflection, .120, In the torsion test the breaking weight was 3882* lbs. ; angle of torsion, 2.9. The force required for crushing, 126,086 lbs.
PONTYPOOL IRON-WORKS, MONMOUTHSHIRE. — Cold-blast Iron: The specific gravity was 7.169. In the tensile test the breaking weight was 26,302* lbs.; extension, .016. In the transverse test the breaking weight was 6669* lbs. ; deflection, .144. In the torsion test the breaking weight was 5235* lbs. ; angle of torsion, 5.3. The force required for crushing, 99,618 lbs.
Errors In Contracting For Iron Rails.
Of late years English railway companies have been in the habit of minutely specifying the qualities of the Iron, its arrangement in the pile, length, and thickness, and mode of working. The railroad engineer (observes Mr. Truran), whose acquaintance with the subject necessarily must be very limited, dictates to the experienced manufacturer the plan to be pursued in the manufacture of the bars. A superior quality of rail is supposed to be ensured by thus specifying the mode of manufacture. Railroad companies, however, commit a serious error when they undertake to define the most advantageous section of pile and mode of rolling, In the first place, by specifying that certain proportions of No. 2 and No. 3 Iron form the pile, they treat the local appellation of 1, 2, and 3, as defining Irons of particular quality and value, instead of being, as they in practice are, convenient terms used by the manufacturer to distinguish Iron that has been rolled this number of times. The quality of the Iron is modified, but not determined, by the number of re-heatings and rollings. The No. 2 of one manufacturer may surpass in strength, fibre, and other qualities the No. 3 of other makers; and in the fabrication of railway bars may be quite as advantageous as the higher denomination. But the railroad companies require the extra process to be gone through, which entails so much additional expense that the superior quality cannot compete in price with the inferior No. 3. Hence, by defining the qualities to be used, the railroad companies unintentionally secure for themselves the inferior rails which they are so anxious to avoid, In the second place, when a specification of the Iron to be used and mode of working accompanies the order for the rails, their manufacture is reduced to a contract to supply according to such specification; and the maker is released of all responsibility respecting the fitness and sufficiency of his Irons for the purpose. The manufacturer, therefore, prefers working under a specification, for, by adhering to the stipulated conditions, should the bars eventually wear badly, or otherwise prove defective, he is absolved from blame. The continental roads constructed under the superintendence of local engineers adopt a more rational course with the manufacturer. They stipulate that the finished bar shall bear certain tests without injurious deflection or opening of the fibre, leaving to the judgment of the manufacturer the quality of the Iron used, and mode of working best calculated for the attainment of these tests with the least expense. By thus stipulating for the presence of certain qualities in the finished bar, the manufacturer is compelled to use such Irons, and adopt such modes of working it, as will ensure their sufficiency.
Mineral Lease. — Ironstone.
In taking a lease of an Ironstone royalty, whether to work the ore for sale, or by an Iron-master requiring the material for his own works, it is essential that the same be procured upon fair and equitable terms. The amount to be paid per ton for royalty will be regulated by the quality of the ore, the facility by which it can be worked, the locality in which it is situated as regards an easy outlet to contiguous markets, &c.; but it is of importance that the lessor should not be trammelled with clauses and conditions in his lease of too restrictive, permissive, and formal a character, which agents too frequently attempt to impose on behalf of their employers. The following has, therefore, been carefully prepared for the guidance of lessees and lessors, the various clauses having already met the approval of parties of experience in the position of landlord on the one hand and of tenant on the other
1. A. B., proprietor of the Ironstone hereafter mentioned, agrees to let to C. D. of . . . . . ., Iron-master, all the seams of Ironstone, commonly called the Ironstone, contained in the district indicated on the plan of the estate belonging to A. B., and lying in the strata which is between what is called the , which said plan was signed by the said A. B. in the treaty for this lease.
2. The estate of A. B. is situate in the parish of. . . . . ., in the county of . . . . . ., and is delineated upon a separate plan, and signed by the parties to this lease.
3. The lease for the term of . . . years, from and after . . . term, 18 . .
4. Tenant to have power to assign to successors or partners in the trade or business now carried on at the . . . . . . Iron Works, the tenant being always bound for the rent, and for performance of all the obligations incumbent on the tenant.
5. The tenant to have full power to search for, win, raise, calcine, and carry away the said. . . . . .Ironstone hereby let; to sink pits, or make open casts or mines, erect engines for drawing and draining the said Ironstone and the water thereof; to bank, to build houses for workmen, and to form hills for depositing and calcining the said Ironstone, and to make the necessary roads through any part of the unlet land of the aforesaid A. B., which roads, when formed, to be kept properly fenced on both sides by the tenant.
6. The tenant not to have power to sink pits, or to break surface of the ground for any other purpose than the making of a road or roads, nor to erect engines for drawing water or Ironstone, nor to build houses within 200 yards of any existing farm steading, excepting air pits and road, which may be nearer to the steading, but not within . . . yards thereof.
7. No char hills or pits shall be made within any belt of plantation, with certain exceptions, nor in any garden ground.
8. To reserve to the landlord all seams of Coal, with the exception of that which requires to be wrought in working the . . . . . . Ironstone hereby let, as being in connexion therewith; and reserving also to the proprietor all bands of Ironstone,
Please Note: These web pages retain the original pagination from the publication