Chapter II.
COMMERCIAL IRON; MAGNETIC METALS; RUST AMMONIA. IRON ORES; NATIVE IRON; PYRITES; METEORIC AND MAGNETIC IRON ORES; RED HEMATITE — SPECULAR IRON; RED OXIDE; BROWN IRON ORE — PEA IRON; CARBONATE OF IRON. MODES OF WORKING IRON ORES. THE BLAST FURNAUE — DESCRIPTION OF; CONSTRUCTION OF THOSE IN GENERAL USE. THE BLOWING MACHINE.
Iron — Ddescription of.
Iron is a malleable and ductile metal, of a blueish-grey colour and dull fibrous structure, but it is susceptible of a high degree of polish, and is the hardest of the malleable and ductile metals. When rubbed it has a slight smell, and it imparts to the tongue a peculiar astringent taste, called chalybeat. It is singularly susceptible of the magnetic virtue, but in its pure state soon loses it. The Iron of commerce is not, however, chemically pure; for, besides containing variable quantities of carbon, traces of silicium, sulphur, and phosphorus may invariably be detected.
COMMERCIAL IRON. — The texture of commercial Iron varies according to the nature of the processes to which it has been subjected during its preparation. A piece of Iron which has been equally hammered in every direction will, on being broken, be found to have a finely granular structure; but when it has been drawn into long bars, in which form it usually comes into the market, the texture will be invariably more or less fibrous in the direction of their length. This silkiness of appearance is most distinct in the better varieties of Iron, and its structure is therefore one of the best indices of the quality of the metal. By skilful management this peculiarity may, however, be in a certain degree imparted to the commoner varieties, and it is, consequently, unsafe from this circumstance alone to judge of the value of the Iron. It is also found that the most fibrous varieties do not retain their peculiarity of structure for an indefinite time, but that after a certain period the grain of the metal often assumes a crystalline appearance. These changes are most frequently observed to take place in the tension-rods of suspension-bridges, and in other situations where the metal is subjected to constant vibrations. The same effect is also produced by friction, and for that reason the axles of locomotives and railway waggons are often found to acquire a crystalline structure, and are thereby rendered harder and more brittle than the metal from which they were originally made. In order to melt this metal, the strongest heat of a wind furnace is required; but when combined with a small proportion of carbon the fusion is more readily effected. On cooling melted Iron, it assumes a pasty consistence before taking the solid form, and it is therefore extremely difficult to obtain it in a crystallised state. When, however, large masses are allowed to cool very slowly, as sometimes happens in the case of the heavy girders which support the sides of furnaces, distinct indications of a cubical crystallization are obtained. At a full red heat Iron may be hammered into any required form, and on being heated to whiteness, two bars may be firmly joined together without the aid of any kind of solder. This operation, which is called welding, is effected by heating two pieces of metal until the exterior is in a semi-liquid state, and then quickly uniting them by repeated blows from a heavy hammer. Considerable experience is requisite in order to effect this object; for on heating Iron to the requisite temperature, it becomes externally coated with a layer of oxide, which would effectually prevent the union of the two fragments if not previously removed. To prevent the formation of such oxide, as well as to combine with that unavoidably produced, a little siliceous sand is sprinkled on the ends of the pieces 'which are to be united before they are placed in the fire. This has not only the effect of combining with any portions of oxide that may be formed, and therby removing it from the surface of the metal, but the silicate of Iron thus produced forms a kind of varnish, which effectually preserves it from the further action of the air. On withdrawing the bars from the fire, this is, by a rapid motion of the mass, shaken off, and two perfectly clean metallic surfaces are thus brought in contact.
MAGNETIC METALS. — Iron and nickel are the only metals which are magnetic at ordinary temperatures. If a mass of Iron be either brought in contact with, or placed at a short distance from a natural or artificial magnet, it becomes itself magnetic, but loses this property the instant the existing magnet is removed. When Iron is combined with a certain amount of carbon, it is known by the name of steel. This substance is much less susceptible of the magnetic influence than ordinary soft Iron. But when once the power has been communicated, it is retained for a considerable time after the removal of the magnet from which it was acquired. Permanent magnets may be obtained by rubbing a bar of steel either with loadstone or an artificial magnet, and in this way an infinite number of steel bars may be rendered magnetic without at all diminishing the power of the bar by which the effect has been produced. The magnetic power of Iron is much influenced by its temperature, as the magnetic needle is but little affected by a mass of that metal when made red hot, but in cooling it will be found to gradually regain its magnetic properties.
RUST — AMMONIA. — Iron may be indefinitely exposed to the action of dry air, or even of dry oxygen gas, without becoming oxidized, but if the air or gas contains any portion of watery vapour, the surface of the metal quickly becomes coated with a layer of rust. This is nothing more than the oxidation of the surface of the metal when exposed in a moist atmosphere. Oxide of Iron thus obtained by exposure to the air usually contains small quantities of ammonia, the presence of which in Iron rust may be explained as follows :— The water, by the aid of which the oxidation is effected, contains in solution a certain amount of air, and consequently of nitrogen gas, which, by uniting with the hydrogen produced by the decomposition of water, leads to the formation of this substance. The formation of ammonia in ordinary rust of Iron must be considered as an important fact, since it was formerly supposed that its presence could only arise from the decomposition of animal matter. Whenever, therefore, ammonia was discovered in oxide covering the blade of any cutting instrument with which a crime was supposed to have been committed, it was considered as a sure indication that the marks produced were the effects of spots of blood remaining on the weapon.
Please Note: These web pages retain the original pagination from the publication