Coronation Pit, built by Messrs. Hawthorn, of 180 horse power, with two lifting sets of 12 inch diameter (pumps); but this engine is not at present required to be kept constantly at work.
During the years 1853 to 1855, this colliery was in a very critical position, having received such a great influx of water as to make it appear next to impossible to check the feeder. By energy and perseverance, however, pumping night and day at the rate of 1,700 to 2,000 gallons per minute, under the management of Mr. John Taylor Ramsay, mining engineer, the feeders were overcome, and the colliery placed in a safe working condition. The present feeders amount to little more than 1,000 gallons per minute. The engines used for drawing Coals are about 140 horse power.
There are two large whin dykes running through this Coal field; one proceeding about 300 yards north of the Coronation shaft and mine, in a north- west direction; the other, a branch from it, running under the village of Walbottle; neither of them, however, through the seams, either up or down; and where the dyke is driven through, the Coal is found on nearly the same level; but before approaching the dyke, for about 60 yards, the Coal is quite cindery, and of no value. There are several other slip dykes in this colliery, from 20 fathoms to a less size. The Coals are conveyed to Lemington staith by an inclined plane and horses; from thence they are taken by keels to ships below bridge. The owners of the colliery employ about 50 keelmen. — For an account of keelmen, See page 60. The extent of royalty held by the owners of Walbottle Colliery is about 4,000 acres, which belongs to his Grace the Duke of Northumberland.
Malleable iron rails were partially laid down at this colliery as early as 1794. — (See page 16.)
The Stella Coal Company.
The collieries of Stella, Townley, Whitefield, and Chopwell, situated at Stella and Ryton, about 6 miles south-west of Newcastle, on the south side of the river Tyne, were carried on towards the close of the last century by George Silvertop, Esq., of Minsteracres; but about the year 1800 he relinquished Chopwell, and subsequently his interest in other collieries, granting leases to other parties. The collieries belonging the Stella Coal Company, are — Stella, Townley, and Whitefield, known as Stella Grand Lease, the royalty of which extends under all the church lands in the parish of Ryton, comprising upwards of 4,000 acres. This royalty is held from the Bishop of Durham by Henry Charles Silvertop, Esq., Mr. John Clayton and others. The Stella Grand Lease, or Townley Main Colliery, was formerly carried on under lease from the late Mr. Gee. Silvertop, by Messrs. Gee. Dunn and Sons, of Newcastle, and the late Mr. Matthias Dunn, of Stella Hall, the former holding 3-4th shares and the latter 1-4th share, realizing, during the period in which they were engaged in this colliery, a handsome fortune. In 1831 the Messrs. Dunn surrendered their lease, and the colliery lay dormant for four or five years; it was then taken by Messrs. John Buddle, A. L. Potter, and T. Y. Hall, in equal shares, having previously secured the Coal in the Rector's Glebe and the Stella freehold; they sunk pits in each royalty, and afterwards the Emma Pit, near Ryton, in the Grand Lease royalty. The late Mr. Dunn, of Hedgefield, having an interest as lessor of 1-8th in the Grand Lease royalty, became a partner, by purchase, in the three collieries, to the extent of 1-8th; after his death the executors sold his share to the existing partners. The present lessees, or owners, are — the representatives of the late Mr. John Buddle, and Messrs. A. Potter, T. Y. Hall, and R. and J. Simpson.
The section of the Townley Collieries, north of where the Ninety-fathom Main dyke runs, and which has been put through in two places, from south to north, is given as follows :— The depth to the first seam, or High Main Coal, varies according to the surface level, but near to the Main dyke, at the C Pit, it is 33 fathoms, and the seam is 7 feet thick; owing, however, to this portion of the Coal being formerly so valuable and of such easy access, it had been nearly all worked out at this colliery, long before it was taken by the late Mr. Silvertop. The next seams are the Crow Coal, the old Five-quarter, with part cannel Coal, all near together; they are found at about 16 fathoms below the Main Coal, but in consequence of their easy access, they have been partially worked out by adits; and Coal in these seams being mixed with pyrites, they are now entirely abandoned for the lower seams. At about 10 fathoms further, is the Ruler, or Hutton seam, 2 feet 6 inches thick, and on account of the hardness of the Coal and thinness of the seam, is only partially worked, though the quality of the Coal is exceedingly good. The next workable seam, at the depth of 76 fathoms, is the Townley, sometimes called the Beaumont or Harvey; it is from 4 feet 4½ inches to 4 feet 6 inches thick; about 9 inches of the top part of this seam is excellent splint or cannel, the remainder being a good household Coal, but not so hard as the Ruler or Hutton seam. The next workable seam, about 7 fathoms further, is called the Gas Coal seam, being a hard rough cannel Coal, expensive to work from its hardness, and only found good in patches. The Stone Coal seam, 90 fathoms from the surface is from 3 feet 2 inches to 3 feet 7 inches thick; it is a hard Coal, of uniform good quality, and particularly adapted for gas and coking purposes. The next seam, at 92 fathoms from the surface, is the Five-quarter, 3 feet 8 inches in thickness, and resembles the Stone Coal. The Three-quarter or Yard Coal, 99 fathoms from the surface is hard and coarse, and not much worked, the other seams being superior. The Brockwell seam, is 110 fathoms from the surface; at this point it is about 3 feet 8 inches thick, including 6 inches of splint or cannel Coal at the bottom. The Brockwell seam is the lowest that has been worked in this district, or in any other portion of the Northern Coal-field.
Before the commencement of the present century, steam engines were erected at Chopwell Colliery, and at the Stella Grand Lease, or Townley A Pit, for the purpose of pumping water from large ponds constructed for the purpose; the water, when raised, was pumped by a low pressure engine of very rude construction, and conveyed to a cistern 52 feet high, and was then made to turn a wheel, with rope, drums, and a brake, by which the brakesman could draw the men and boys, as well as the Coals, up the shaft. These two engines, put up by the late Mr. James Hall, of Greenside, were the last employed in this manner in the North of England; they were abandoned — the one in 1800, and the other in 1808. In 1835, Mr. T. Y. Hall's new method was successfully adopted at this colliery, which two years previously he had introduced at South Hetton, which consisted of drawing Coals at great speed by means of tubs and cages in the pit shafts; and by using carriages, with boggy wheels and tubs attached, in lieu of corves; suitable edge rails were also adopted throughout the entire pit workings in place of the angle iron, called tram plates. — (See Transactions of "North of England Mining
Please Note: These web pages retain the original pagination from the publication